Öğretim Üyeleri

Prof. Dr. M. İ. Can Dede

Bölüm Başkanı

Eğitim

Lisans: İstanbul Teknik Üniversitesi, Türkiye, Makina Mühendisliği, 1999
Yüksek Lisans: Orta Doğu Teknik Üniversitesi, Türkiye, Makina Mühendisliği, 2003
Doktora: Florida International Üniversitesi, ABD, Makina Mühendisliği, 2007

Çalışma Alanları

  • Haptik, Teleoperasyon
  • Robot Denetleyici Tasarımı
  • İnsansız Sualtı Araçları
  • +90 232 750 6704 - 6778
  • +90 232 750 6701
  • Makina Mühendisliği Binası (Z18)

2024

Emet, Hazal; Gür, Berke; Dede, Mehmet İsmet Can

The design and kinematic representation of a soft robot in a simulation environment Journal Article

Robotica, 42 (1), pp. 139 – 152, 2024.

Abstract | Links | BibTeX

2023

Gorgulu, Ibrahimcan; Dede, Mehmet Ismet Can; Kiper, Gokhan

Stiffness modeling of a 2-DoF over-constrained planar parallel mechanism Journal Article

MECHANISM AND MACHINE THEORY, 185 , 2023.

Abstract | Links | BibTeX

Aldanmaz, Ataol Behram; Ayit, Orhan; Kiper, Gökhan; Dede, Mehmet İsmet Can

Gravity compensation of a 2R1T mechanism with remote center of motion for minimally invasive transnasal surgery applications Journal Article

Robotica, 41 (3), pp. 807 – 820, 2023, (All Open Access, Green Open Access).

Abstract | Links | BibTeX

Dede, Mehmet İsmet Can; Büyüköztekin, Tarlk; Hanalioǧlu, Şahin; Işlkay, İlkay; Berker, Mustafa

Enabling personalization of a robotic surgery procedure via a surgery training simulator Journal Article

Robotica, 41 (3), pp. 869 – 884, 2023.

Abstract | Links | BibTeX

Ayit, Orhan; Dede, Mehmet İsmet Can

A study on a computationally efficient controller design for a surgical robotic system Journal Article

International Journal of Dynamics and Control, 11 (6), pp. 3176 – 3187, 2023.

Abstract | Links | BibTeX

2022

Şahin, O N; Dede, M İ C

Model-based detection and isolation of the wheel slippage and actuator faults of a holonomic mobile robot Journal Article

Industrial Robot, 49 (6), pp. 1202-1217, 2022.

Abstract | Links | BibTeX

Kanlk, M; Ayit, O; Dede, M I C; Tatlicioglu, E

Toward safe and high-performance human-robot collaboration via implementation of redundancy and understanding the effects of admittance term parameters Journal Article

Robotica, 40 (7), pp. 2112-2127, 2022.

Abstract | Links | BibTeX

Maaroof, O W; Dede, M İ C; Aydin, L

A Robot Arm Design Optimization Method by Using a Kinematic Redundancy Resolution Technique Journal Article

Robotics, 11 (1), 2022.

Abstract | Links | BibTeX

2021

Şahin, O N; Dede, M İ C

Investigation of longitudinal friction characteristics of an omnidirectional wheel via LuGre model Journal Article

Robotica, 39 (9), pp. 1654-1673, 2021.

Abstract | Links | BibTeX

Dede, M I C; Kiper, G; Ayav, T; Ozdemirel, B; Tatlıcıoglu, E; Hanalioglu, S; Işıkay, I; Berker, M

Human–robot interfaces of the neuroboscope: A minimally invasive endoscopic pituitary tumor surgery robotic assistance system Journal Article

Journal of Medical Devices, Transactions of the ASME, 15 (1), 2021.

Abstract | Links | BibTeX

Görgülü, I; Dede, M I C; Carbone, G

Experimental structural stiffness analysis of a surgical haptic master device manipulator Journal Article

Journal of Medical Devices, Transactions of the ASME, 15 (1), 2021.

Abstract | Links | BibTeX

Uzunoǧlu, E; Tatlicioǧlu, E; Dede, M İ C

A Multi-Priority Controller for Industrial Macro-Micro Manipulation Journal Article

Robotica, 39 (2), pp. 217-232, 2021.

Abstract | Links | BibTeX

2020

Yasir, Abdullah; Kiper, Gokhan; Dede, Can M I

Kinematic design of a non-parasitic 2R1T parallel mechanism with remote center of motion to be used in minimally invasive surgery applications Journal Article

MECHANISM AND MACHINE THEORY, 153 , 2020, ISSN: 0094-114X.

Abstract | Links | BibTeX

Gorgulu, Ibrahimcan; Carbone, Giuseppe; Dede, Can M I

Time efficient stiffness model computation for a parallel haptic mechanism via the virtual joint method Journal Article

MECHANISM AND MACHINE THEORY, 143 , 2020, ISSN: 0094-114X.

Abstract | Links | BibTeX

2017

Uzunoglu, Emre; Dede, Mehmet Ismet Can

Extending model-mediation method to multi-degree-of-freedom teleoperation systems experiencing time delays in communication Journal Article

ROBOTICA, 35 (5), pp. 1121-1136, 2017, ISSN: 0263-5747.

Abstract | Links | BibTeX

Kiper, Gokhan; Dede, Mehmet Ismet Can; Maaroof, Omar W; Ozkahya, Merve

Function generation with two loop mechanisms using decomposition and correction method Journal Article

MECHANISM AND MACHINE THEORY, 110 , pp. 16-26, 2017, ISSN: 0094-114X.

Abstract | Links | BibTeX

Sahin, Osman Nuri; Uzunoglu, Emre; Tatlicioglu, Enver; Dede, Can M I

Design and Development of an Educational Desktop Robot (RD)-D-3 Journal Article

COMPUTER APPLICATIONS IN ENGINEERING EDUCATION, 25 (2), pp. 222-229, 2017, ISSN: 1061-3773.

Abstract | Links | BibTeX

2016

Gundogdu, Hilal Tolasa; Dede, Mehmet Ismet Can; Taner, Baris; Ridolfi, Alessandro; Costanzi, Riccardo; Allotta, Benedetto

Design and testing of an innovative cleaning tool for underwater applications Journal Article

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART M-JOURNAL OF ENGINEERING FOR THE MARITIME ENVIRONMENT, 230 (4), pp. 579-590, 2016, ISSN: 1475-0902.

Abstract | Links | BibTeX

Dede, Mehmet Ismet Can; Maaroof, Omar W; Tatlicioglu, Enver

A New Objective Function for Obstacle Avoidance by Redundant Service Robot Arms Journal Article

INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS, 13 , 2016, ISSN: 1729-8806.

Abstract | Links | BibTeX

Uzunoglu, Emre; Dede, Mehmet Ismet Can; Kiper, Gokhan

Trajectory planning for a planar macro-micro manipulator of a laser-cutting machine Journal Article

INDUSTRIAL ROBOT-THE INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH AND APPLICATION, 43 (5, SI), pp. 513-523, 2016, ISSN: 0143-991X.

Abstract | Links | BibTeX

2014

Alizade, Rasim I; Kiper, Gokhan; Bagdadioglu, Baris; Dede, Can M I

Function synthesis of Bennett 6R mechanisms using Chebyshev approximation Journal Article

MECHANISM AND MACHINE THEORY, 81 , pp. 62-78, 2014, ISSN: 0094-114X.

Abstract | Links | BibTeX

Maaroof, Omar W; Dede, Mehmet Ismet Can

Kinematic synthesis of over-constrained double-spherical six-bar mechanism Journal Article

MECHANISM AND MACHINE THEORY, 73 , pp. 154-168, 2014, ISSN: 0094-114X.

Abstract | Links | BibTeX

2013

Kiper, Gökhan; Bilgincan, Tunç; Dede, Mehmet İsmet Can

Function generation synthesis of planar 5R mechanism Journal Article

2013.

Abstract | Links | BibTeX

Prof. Dr. H. Seçil Artem

Eğitim

Lisans: Orta Doğu Teknik Üniversitesi, Türkiye, Mühendislik Bilimleri, 1987
Yüksek Lisans: Orta Doğu Teknik Üniversitesi, Türkiye, Mühendislik Bilimleri, 1990
Doktora: Orta Doğu Teknik Üniversitesi, Türkiye, Mühendislik Bilimleri, 1999

Çalışma Alanları

  • Kısmi Diferansiyel Denklemler için Nümerik Çözümler
  • Mühendislik Matematiği
  • +90 232 750 6771
  • +90 232 750 6701
  • Makina Mühendisliği Binası (114)

2021

Kangal, Serkan; Say, Harun A; Ayakda, Ozan; Kartav, Osman; Aydin, Levent; Artem, Secil H; Aktas, Engin; Yuceturk, Kutay; Tanoglu, Metin; Kandemir, Sinan; Beylergil, Bertan

A Comprehensive Study on Burst Pressure Performance of Aluminum Liner for Hydrogen Storage Vessels Journal Article

JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 143 (4), 2021.

Abstract | Links | BibTeX

Aydin, L; Artem, H S; Deveci, H A

Single- and Multiobjective Optimizations of Dimensionally Stable Composites Using Genetic Algorithms Journal Article

Mechanics of Composite Materials, 57 (3), pp. 321-336, 2021.

Abstract | Links | BibTeX

Kartav, O; Kangal, S; Yücetürk, K; Tanoğlu, M; Aktaş, E; Artem, H S

Development and analysis of composite overwrapped pressure vessels for hydrogen storage Journal Article

Journal of Composite Materials, 55 (28), pp. 4141-4155, 2021.

Abstract | Links | BibTeX

2020

Kangal, S; Kartav, O; Tanoğlu, M; Aktaş, E; Artem, H S

Investigation of interlayer hybridization effect on burst pressure performance of composite overwrapped pressure vessels with load-sharing metallic liner Journal Article

Journal of Composite Materials, 54 (7), pp. 961-980, 2020.

Abstract | Links | BibTeX

2017

Deveci, Arda H; Artem, Secil H

Optimum design of fatigue-resistant composite laminates using hybrid algorithm Journal Article

COMPOSITE STRUCTURES, 168 , pp. 178-188, 2017, ISSN: 0263-8223.

Abstract | Links | BibTeX

2016

Deveci, Arda H; Aydin, Levent; Artem, Secil H

Buckling optimization of composite laminates using a hybrid algorithm under Puck failure criterion constraint Journal Article

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 35 (16), pp. 1233-1247, 2016, ISSN: 0731-6844.

Abstract | Links | BibTeX

2008

Aydin, Levent; Artem, Secil Altundag H

Axisymmetric crack problem of thick-walled cylinder with loadings on crack surfaces Journal Article

ENGINEERING FRACTURE MECHANICS, 75 (6), pp. 1294-1309, 2008, ISSN: 0013-7944.

Abstract | Links | BibTeX

2002

Artem, HSA; Gecit, MR

An elastic hollow cylinder under axial tension containing a crack and two rigid inclusions of ring shape Journal Article

COMPUTERS & STRUCTURES, 80 (27-30), pp. 2277-2287, 2002, ISSN: 0045-7949, (5th International Conference on Computational Structures Technology/2nd International Conference on Engineering Computational Technology, LEUVEN, BELGIUM, SEP 06-08, 2000).

Abstract | Links | BibTeX

Doç. Dr. Murat Barışık

Eğitim

Lisans: Orta Doğu Teknik Üniversitesi, Türkiye, Makina Mühendisliği, 2006
Yüksek Lisans: Orta Doğu Teknik Üniversitesi, Türkiye, Makina Mühendisliği, 2008
Doktora: Old Dominion Üniversitesi, USA, Uzay ve Makina Mühendisliği, 2012

Çalışma Alanları

  • Mikro/nano ölçekli Gaz ve Sıvı Akışı/Isı transferi,
  • Mikroakışkanlar
  • Mikro/Nano ölçekli Isı Transferi
  • Nanoakışkanlar
  • Nano-ölçekli Elektrokinetik Teori
  • Nanoparçacıklar
  • Moleküler Dinamik
  • +90 232 750 6784
  • +90 232 750 6701
  • Makina Mühendisliği Binası (Z17)

2023

İplikçi, Hande; Barisik, Murat; Türkdoğan, Ceren; Martin, Seçkin; Yeke, Melisa; Nuhoğlu, Kaan; Esenoğlu, Gözde; Tanoğlu, Metin; Aktaş, Engin; Dehneliler, Serkan; İriş, Mehmet Erdem

Effects of nanosecond laser ablation parameters on surface modification of carbon fiber reinforced polymer composites Journal Article

Journal of Composite Materials, 57 (18), pp. 2843 – 2855, 2023.

Abstract | Links | BibTeX

Esenoğlu, Gözde; Tanoğlu, Metin; Barisik, Murat; İplikçi, Hande; Yeke, Melisa; Nuhoğlu, Kaan; Türkdoğan, Ceren; Martin, Seçkin; Aktaş, Engin; Dehneliler, Serkan; Gürbüz, Ahmet Ayberk; İriş, Mehmet Erdem

Investigating the Effects of PA66 Electrospun Nanofibers Layered within an Adhesive Composite Joint Fabricated under Autoclave Curing Journal Article

ACS Omega, 8 (36), pp. 32656 – 32666, 2023, (All Open Access, Gold Open Access, Green Open Access).

Abstract | Links | BibTeX

2022

Yenigun, O; Barisik, M

Active heat transfer enhancement by interface-localized liquid dielectrophoresis using interdigitated electrodes Journal Article

Carbon, 189 , pp. 339-348, 2022.

Abstract | Links | BibTeX

Sabet, S; Barisik, M; Buonomo, B; Manca, O

Thermal and hydrodynamic behavior of forced convection gaseous slip flow in a Kelvin cell metal foam Journal Article

International Communications in Heat and Mass Transfer, 131 , 2022.

Abstract | Links | BibTeX

Esenoğlu, G; Barisik, M; Tanoğlu, M; Yeke, M; Türkdoğan, C; İplikçi, H; Martin, S; Nuhoğlu, K; Aktaş, E; Dehneliler, S; İriş, M E

Improving adhesive behavior of fiber reinforced composites by incorporating electrospun Polyamide-6,6 nanofibers in joining region Journal Article

Journal of Composite Materials, 56 (29), pp. 4449-4459, 2022.

Abstract | Links | BibTeX

2021

Alan, B O; Barisik, M

Size and roughness dependent temperature effects on surface charge of silica nanoparticles Journal Article

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 629 , 2021.

Abstract | Links | BibTeX

Yenigun, O; Barisik, M

Local Heat Transfer Control using Liquid Dielectrophoresis at Graphene/Water Interfaces Journal Article

International Journal of Heat and Mass Transfer, 166 , 2021.

Abstract | Links | BibTeX

2020

Ozcelik, Gokberk H; Satiroglu, Ezgi; Barisik, Murat

Size dependent influence of contact line pinning on wetting of nano-textured/patterned silica surfaces Journal Article

NANOSCALE, 12 (41), pp. 21376-21391, 2020, ISSN: 2040-3364.

Abstract | Links | BibTeX

Yakin, Fetiye Esin; Barisik, Murat; Sen, Tumcan

Pore Size and Porosity Dependent Zeta Potentials of Mesoporous Silica Nanoparticles Journal Article

JOURNAL OF PHYSICAL CHEMISTRY C, 124 (36), pp. 19579-19587, 2020, ISSN: 1932-7447.

Abstract | Links | BibTeX

Sen, Tumcan; Barisik, Murat

Slip Effects on Ionic Current of Viscoelectric Electroviscous Flows through Different Length Nanofluidic Channels Journal Article

LANGMUIR, 36 (31), pp. 9191-9203, 2020, ISSN: 0743-7463.

Abstract | Links | BibTeX

Alan, Oyku B; Barisik, Murat; Ozcelik, Gokberk H

Roughness Effects on the Surface Charge Properties of Silica Nanoparticles Journal Article

JOURNAL OF PHYSICAL CHEMISTRY C, 124 (13), pp. 7274-7286, 2020, ISSN: 1932-7447.

Abstract | Links | BibTeX

Ozcelik, H G; Sozen, Y; Sahin, H; Barisik, M

Parametrizing nonbonded interactions between silica and water from first principles Journal Article

Applied Surface Science, 504 , 2020, (cited By 2).

Links | BibTeX

Ozcelik, H G; Ozdemir, A C; Kim, B; Barisik, M

Wetting of single crystalline and amorphous silicon surfaces: effective range of intermolecular forces for wetting Journal Article

Molecular Simulation, 46 (3), pp. 224-234, 2020, (cited By 3).

Links | BibTeX

2017

Celebi, Alper Tunga; Barisik, Murat; Beskok, Ali

Electric field controlled transport of water in graphene nano-channels Journal Article

JOURNAL OF CHEMICAL PHYSICS, 147 (16), 2017, ISSN: 0021-9606.

Abstract | Links | BibTeX

Kalyoncu, Gulce; Barisik, Murat

Analytical solution of micro-/nanoscale convective liquid flows in tubes and slits Journal Article

MICROFLUIDICS AND NANOFLUIDICS, 21 (9), 2017, ISSN: 1613-4982.

Abstract | Links | BibTeX

2016

Kalyoncu, Gulce; Barisik, Murat

The extended Graetz problem for micro-slit geometries; analytical coupling of rarefaction, axial conduction and viscous dissipation Journal Article

INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 110 , pp. 261-269, 2016, ISSN: 1290-0729.

Abstract | Links | BibTeX

Pham, An Truong; Barisik, Murat; Kim, BoHung

Interfacial thermal resistance between the graphene-coated copper and liquid water Journal Article

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 97 , pp. 422-431, 2016, ISSN: 0017-9310.

Abstract | Links | BibTeX

Vo, Truong Quoc; Barisik, Murat; Kim, BoHung

Atomic density effects on temperature characteristics and thermal transport at grain boundaries through a proper bin size selection Journal Article

JOURNAL OF CHEMICAL PHYSICS, 144 (19), 2016, ISSN: 0021-9606.

Abstract | Links | BibTeX

Barisik, Murat; Beskok, Ali

``Law of the nano-wall'' in nano-channel gas flows Journal Article

MICROFLUIDICS AND NANOFLUIDICS, 20 (3), 2016, ISSN: 1613-4982.

Abstract | Links | BibTeX

2015

Vo, Truong Quoc; Barisik, Murat; Kim, BoHung

Near-surface viscosity effects on capillary rise of water in nanotubes Journal Article

PHYSICAL REVIEW E, 92 (5), 2015, ISSN: 1539-3755.

Abstract | Links | BibTeX

Barisik, Murat; Yazicioglu, Almila Guevenc; Cetin, Barbaros; Kakac, Sadik

Analytical solution of thermally developing microtube heat transfer including axial conduction, viscous dissipation, and rarefaction effects Journal Article

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 67 , pp. 81-88, 2015, ISSN: 0735-1933.

Abstract | Links | BibTeX

Barisik, Murat; Beskok, Ali

Molecular free paths in nanoscale gas flows Journal Article

MICROFLUIDICS AND NANOFLUIDICS, 18 (5-6), pp. 1365-1371, 2015, ISSN: 1613-4982.

Abstract | Links | BibTeX

2014

Atalay, Selcuk; Barisik, Murat; Beskok, Ali; Qian, Shizhi

Surface Charge of a Nanoparticle Interacting with a Flat Substrate Journal Article

JOURNAL OF PHYSICAL CHEMISTRY C, 118 (20), pp. 10927-10935, 2014, ISSN: 1932-7447.

Abstract | Links | BibTeX

Pham, An Truong; Barisik, Murat; Kim, Bohung

Molecular Dynamics Simulations of Kapitza Length for Argon-Silicon and Water-Silicon Interfaces Journal Article

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 15 (2), pp. 323-329, 2014, ISSN: 2234-7593.

Abstract | Links | BibTeX

2012

Barisik, Murat; Beskok, Ali

Surface-gas interaction effects on nanoscale gas flows Journal Article

MICROFLUIDICS AND NANOFLUIDICS, 13 (5), pp. 789-798, 2012, ISSN: 1613-4982.

Abstract | Links | BibTeX

Shi, Ziyuan; Barisik, Murat; Beskok, Ali

Molecular dynamics modeling of thermal resistance at argon-graphite and argon-silver interfaces Journal Article

INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 59 , pp. 29-37, 2012, ISSN: 1290-0729.

Abstract | Links | BibTeX

Prof. Dr. Erdal Çetkin

Bölüm Başkan Yardımcısı

Eğitim

Lisans: Kocaeli Üniversitesi, Türkiye, Makina Mühendisliği, 2007
Yüksek Lisans: Duke Üniversitesi, ABD, Makina Mühendisliği ve Malzeme Bilimi, 2010
Doktora: Duke Üniversitesi, ABD, Makina Mühendisliği ve Malzeme Bilimi, 2013

Çalışma Alanları

  • Vasküler yapılar
  • Kendini-soğutma
  • Kendini-iyileştirme
  • Yapısal gelişim teorisi
  • Isı transferi iyileştirme
  • Elektronik Soğutma
  • +90 232 750 6713
  • +90 232 750 6701
  • Makina Mühendisliği Binası (119)

2023

Gocmen, Sinan; Cetkin, Erdal

Experimental Investigation of Air Cooling With/Out Tab Cooling in Cell and Module Levels for Thermal Uniformity in Battery Packs Journal Article

Journal of Heat Transfer, 145 (2), 2023.

Abstract | Links | BibTeX

Gungor, Sahin; Gocmen, Sinan; Cetkin, Erdal

A review on battery thermal management strategies in lithium-ion and post-lithium batteries for electric vehicles Journal Article

Journal of Thermal Engineering, 9 (4), pp. 1078 – 1099, 2023, (All Open Access, Gold Open Access, Green Open Access).

Abstract | Links | BibTeX

Coşkun, Turgay; Çetkin, Erdal

Vascularized mini cooling channels to achieve temperature uniformity: Battery thermal management and electronic cooling Journal Article

Research on Engineering Structures and Materials, 9 (3), pp. 375 – 385, 2023, (All Open Access, Bronze Open Access).

Abstract | Links | BibTeX

Naseri, F; Gil, S; Barbu, C; Cetkin, E; Yarimca, G; Jensen, A C; Larsen, P G; Gomes, C

Digital twin of electric vehicle battery systems: Comprehensive review of the use cases, requirements, and platforms Journal Article

Renewable and Sustainable Energy Reviews, 179 , 2023, (All Open Access, Green Open Access, Hybrid Gold Open Access).

Abstract | Links | BibTeX

Coşkun, Turgay; Çetkin, Erdal

Cold plate enabling air and liquid cooling simultaneously: Experimental study for battery pack thermal management and electronic cooling Journal Article

International Journal of Heat and Mass Transfer, 217 , 2023.

Abstract | Links | BibTeX

2022

Gungor, Sahin; Cetkin, Erdal; Lorente, Sylvie

Canopy-to-canopy liquid cooling for the thermal management of lithium-ion batteries, a constructal approach Journal Article

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 182 , 2022.

Abstract | Links | BibTeX

Sahin, R C; Gocmen, S; Cetkin, E

Thermal management system for air-cooled battery packs with flow-disturbing structures Journal Article

Journal of Power Sources, 551 , 2022.

Abstract | Links | BibTeX

Gungor, S; Cetkin, E

Enhanced temperature uniformity with minimized pressure drop in electric vehicle battery packs at elevated C-rates Journal Article

Heat Transfer, 51 (8), pp. 7540-7561, 2022.

Abstract | Links | BibTeX

Gungor, S; Cetkin, E; Lorente, S

Thermal and electrical characterization of an electric vehicle battery cell, an experimental investigation Journal Article

Applied Thermal Engineering, 212 , 2022.

Abstract | Links | BibTeX

Demirkıran, İ G; Rocha, L A O; Cetkin, E

Emergence of asymmetric straight and branched fins in horizontally oriented latent heat thermal energy storage units Journal Article

International Journal of Heat and Mass Transfer, 189 , 2022.

Abstract | Links | BibTeX

Demirkıran, İ G; Cetkin, E

Computation time reduction of PCM melting process by changing modeling parameters Journal Article

Numerical Heat Transfer; Part A: Applications, 83 (1), pp. 50-67, 2022.

Abstract | Links | BibTeX

Gocmen, S; Cetkin, E

Emergence of elevated battery positioning in air cooled battery packs for temperature uniformity in ultra-fast dis/charging applications Journal Article

Journal of Energy Storage, 45 , 2022.

Abstract | Links | BibTeX

Gungor, S; Cetkin, E; Lorente, S

Canopy-to-canopy liquid cooling for the thermal management of lithium-ion batteries, a constructal approach Journal Article

International Journal of Heat and Mass Transfer, 182 , 2022.

Abstract | Links | BibTeX

2021

Cetkin, E; Miguel, A F

Asymmetric Y-shaped Micromixers with Spherical Mixing Chamber for Enhanced Mixing Efficiency and Reduced Flow Impedance Journal Article

JOURNAL OF APPLIED FLUID MECHANICS, 14 (5), pp. 1389-1397, 2021.

Abstract | Links | BibTeX

Demirkiran, Ismail Gurkan; Cetkin, Erdal

Emergence of rectangular shell shape in thermal energy storage applications: Fitting melted phase changing material in a fixed space Journal Article

JOURNAL OF ENERGY STORAGE, 37 , 2021.

Abstract | Links | BibTeX

2020

Coskun, Turgay; Cetkin, Erdal

A review of heat and fluid flow characteristics in microchannel heat sinks Journal Article

HEAT TRANSFER, 49 (8), pp. 4109-4133, 2020, ISSN: 2688-4534.

Abstract | Links | BibTeX

Gocmen, Sinan; Gungor, Sahin; Cetkin, Erdal

Thermal management of electric vehicle battery cells with homogeneous coolant and temperature distribution Journal Article

JOURNAL OF APPLIED PHYSICS, 127 (23), 2020, ISSN: 0021-8979.

Abstract | Links | BibTeX

2017

Cetin, Eylem; Cetkin, Erdal

The effect of cavities and T-shaped assembly of fins on overall thermal resistances Journal Article

INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY, 35 (4), pp. 944-952, 2017, ISSN: 0392-8764.

Abstract | Links | BibTeX

Cetkin, Erdal

Constructal Microdevice Manifold Design With Uniform Flow Rate Distribution by Consideration of the Tree-Branching Rule of Leonardo da Vinci and Hess-Murray Rule Journal Article

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 139 (8), 2017, ISSN: 0022-1481.

Abstract | Links | BibTeX

Cetkin, E

VASCULAR STRUCTURES FOR SMART FEATURES: SELF-COOLING AND SELF-HEALING Journal Article

JOURNAL OF THERMAL ENGINEERING, 3 (4, 5), pp. 1338-1345, 2017, ISSN: 2148-7847.

Abstract | Links | BibTeX

2016

Yenigun, O; Cetkin, E

Experimental and numerical investigation of constructal vascular channels for self-cooling: Parallel channels, tree-shaped and hybrid designs Journal Article

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 103 , pp. 1155-1165, 2016, ISSN: 0017-9310.

Abstract | Links | BibTeX

2015

Cetkin, Erdal

Constructal Vascular Structures With High-Conductivity Inserts for Self-Cooling Journal Article

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 137 (11), 2015, ISSN: 0022-1481.

Abstract | Links | BibTeX

Cetkin, Erdal; Oliani, Alessandro

The natural emergence of asymmetric tree-shaped pathways for cooling of a non-uniformly heated domain Journal Article

JOURNAL OF APPLIED PHYSICS, 118 (2), 2015, ISSN: 0021-8979.

Abstract | Links | BibTeX

Cetkin, Erdal

CONSTRUCTAL STRUCTURES FOR SELF-COOLING: MICROVASCULAR WAVY AND STRAIGHT CHANNELS Journal Article

JOURNAL OF THERMAL ENGINEERING, 1 (5, 1), pp. 166-174, 2015, ISSN: 2148-7847.

Abstract | Links | BibTeX

Cetkin, E; Lorente, S; Bejan, A

Vascularization for cooling and reduced thermal stresses Journal Article

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 80 , pp. 858-864, 2015, ISSN: 0017-9310.

Abstract | Links | BibTeX

Cetkin, Erdal

Constructal vascularized structures Journal Article

OPEN ENGINEERING, 5 (1), pp. 220-228, 2015, ISSN: 2391-5439.

Abstract | Links | BibTeX

Cetkin, Erdal

INVERTED FINS FOR COOLING OF A NON-UNIFORMLY HEATED DOMAIN Journal Article

JOURNAL OF THERMAL ENGINEERING, 1 (1), pp. 1-9, 2015, ISSN: 2148-7847.

Abstract | Links | BibTeX

2014

Cetkin, Erdal

Three-dimensional high-conductivity trees for volumetric cooling Journal Article

INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 38 (12), pp. 1571-1577, 2014, ISSN: 0363-907X.

Abstract | Links | BibTeX

Cetkin, Erdal

EMERGENCE OF TAPERED DUCTS IN VASCULAR DESIGNS WITH LAMINAR AND TURBULENT FLOWS Journal Article

JOURNAL OF POROUS MEDIA, 17 (8), pp. 715-722, 2014, ISSN: 1091-028X.

Abstract | Links | BibTeX

2013

Cetkin, E; Lorente, S; Bejan, A

Constructal paddle design with ``fingers'' Journal Article

JOURNAL OF APPLIED PHYSICS, 113 (19), 2013, ISSN: 0021-8979.

Abstract | Links | BibTeX

2012

Cetkin, E; Lorente, S; Bejan, A

Vascularization for cooling a plate heated by a randomly moving source Journal Article

JOURNAL OF APPLIED PHYSICS, 112 (8), 2012, ISSN: 0021-8979.

Abstract | Links | BibTeX

Lorente, S; Cetkin, E; Bello-Ochende, T; Meyer, J P; Bejan, A

The constructal-law physics of why swimmers must spread their fingers and toes Journal Article

JOURNAL OF THEORETICAL BIOLOGY, 308 , pp. 141-146, 2012, ISSN: 0022-5193.

Abstract | Links | BibTeX

Araş. Gör. Dr. Talha Eraz

Eğitim

Lisans: Orta Doğu Teknik Üniversitesi, Makina Mühendisliği, 2012
Yüksek Lisans: İzmir Yüksek Teknoloji Enstitüsü, Makina Mühendisliği, 2016
Doktora: İzmir Yüksek Teknoloji Enstitüsü, Makina Mühendisliği, 2023

Çalışma Alanları

  • Kablo Tahrikli Manipulatörler
  • Mekanizma Sentez Metodları
  • +90 232 750 6732
  • +90 232 750 6701
  • Makina Mühendisliği Binası (Z27)

Dr. Araş. Gör. Timuçin Eriş

Eğitim

Lisans: Gazi Üniversitesi, Makina Mühendisliği, 1991
Yüksek Lisans: Illinois Teknoloj Enstitüsü, ABD, Makina Mühendisliği, 1997
Doktora: Dokuz Eylül Üniversitesi, Makina Mühendisliği, 2008

Çalışma Alanları

  • Kontrol Sistemleri,
  • Yapay Sinir Ağları,
  • Sonlu Elemanlar
  • +90 232 750 6790
  • +90 232 750 6701
  • Makina Mühendisliği Binası (203, 2.kat)

Prof. Dr. Mustafa Güden

Eğitim

Lisans: Orta Doğu Teknik Üniversitesi, Türkiye, Metalurji ve Malzeme Mühendisliği, 1989
Yüksek Lisans: Orta Doğu Teknik Üniversitesi, Türkiye, Metalurji ve Malzeme Mühendisliği, 1992
Doktora: Delaware Üniversitesi, ABD, Malzeme Bilimi ve Mühendisliği, 1999

Çalışma Alanları

  • Kompozit malzemeler (Karbon ve cam fiber ve nano silika takviyeli epoksi matris kompozitler, seramik fiber ve parçacık takviyeli alüminyum ve magnezyum metal matris kompozitler ve seramik-seramik kompozitler): üretim süreçleri, statik ve dinamik testler ve dinamik deformasyon ve kırılma olaylarının numerik modellenmesi (Ls-DYNA, Mat 162)
  • Hücresel (cellular) ve latis (lattice) yapılar (alüminyum köpükler, bal peteği yapıları, dalgalı (corrugated) ve latis yapılar, titanyum köpükler ve latis yapılar, köpük beton ve cam köpükler): üretim süreçleri, statik ve dinamik testler ve dinamik deformasyon ve kırılma olaylarının numerik modellenmesi
  • Eklemeli imalat (316 L çelik ve Ti64)
  • Yüksek hız test metotları (Split Hopkinson Pressure Bar ve direkt ve Taylor darbe testleri): test geliştirme ve analiz yöntemleri ve numerik ve analitik modelleme
  • Malzemelerin mekanik davranışları ve
  • Mikro-yapı ve mekanik özellik ilişkileri
  • +90 232 750 6779
  • +90 232 750 6701
  • Makina Mühendisliği Binası (Z10)

77 entries « 1 of 2 »

2023

Enser, Samed; Guden, Mustafa; Tasdemirci, Alper; Davut, Kemal

The strain rate history effect in a selective-laser-melt 316L stainless steel Journal Article

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 862 , 2023.

Abstract | Links | BibTeX

Tuncer, C; Güden, M; Orhan, M; Sarıkaya, M K; Taşdemirci, A

Quasi-static and dynamic Brazilian testing and failure analysis of a deer antler in the transverse to the osteon growth direction Journal Article

Journal of the Mechanical Behavior of Biomedical Materials, 138 , 2023.

Abstract | Links | BibTeX

Enser, S; Güden, M; Taşdemirci, A; Davut, K

The strain rate history effect in a selective-laser-melt 316L stainless steel Journal Article

Materials Science and Engineering A, 862 , 2023.

Abstract | Links | BibTeX

Zeybek, M K; Güden, M; Taşdemirci, A

The Effect of Strain Rate on the Compression Behavior of Additively Manufactured Short Carbon Fiber-Reinforced Polyamide Composites with Different Layer Heights, Infill Patterns, and Built Angles Journal Article

Journal of Materials Engineering and Performance, 2023.

Abstract | Links | BibTeX

Turan, A K; Tasdemirci, A; Kara, A; Sahin, S; Guden, M

Investigation of penetration behavior of combined geometry shells at quasi-static and intermediate strain rates: An experimental and numerical study Journal Article

Thin-Walled Structures, 182 , 2023.

Abstract | Links | BibTeX

Güden, Mustafa; Ülker, Sevkan; Movahedi, Nima

Epoxy matrix nano composites: modulus, strength and ductility enhancement through auxeticity of α-Cristobalite filler Journal Article

Materials Letters, 349 , 2023.

Abstract | Links | BibTeX

Güden, Mustafa; Riaz, Arslan Bin; Toksoy, Ahmet Kaan; Yıldıztekin, Murat; Erten, Hacer İrem; Çimen, Gülden; Hızlı, Burak; Çellek, Burçin Seven; Güleç, Efe; Taşdemirci, Alper; Yavaş, Hakan; Altınok, Sertaç

Investigation and validation of the flow stress equation and damage model parameters of an electron beam melted Ti6Al4V alloy with a martensitic phase Journal Article

Materials Science and Engineering: A, 885 , 2023.

Abstract | Links | BibTeX

Çelik, Muhammet; Güden, Mustafa; Sarıkaya, Mustafa; Taşdemirci, Alper; Genç, Cem; Ersoy, Kurtuluş; Serin, Özgür

The impact response of a Nomex® honeycomb core/E-glass/epoxy composite sandwich structure to increasing velocities: Experimental and numerical analysis Journal Article

Composite Structures, 320 , 2023.

Abstract | Links | BibTeX

Sarıkaya, Mustafa; Güden, Mustafa; Kambur, Çağdaş; Özbek, Sevim Çankaya; Taşdemirci, Alper

Development of the Johnson-Cook flow stress and damage parameters for the impact response of polycarbonate: Experimental and numerical approach Journal Article

International Journal of Impact Engineering, 179 , 2023.

Abstract | Links | BibTeX

Mauko, Anja; Sarıkaya, Mustafa; Güden, Mustafa; Duarte, Isabel; Borovinšek, Matej; Vesenjak, Matej; Ren, Zoran

High strain-rate deformation analysis of open-cell aluminium foam Journal Article

Journal of Materials Research and Technology, 25 , pp. 1208 – 1221, 2023, (All Open Access, Gold Open Access, Green Open Access).

Abstract | Links | BibTeX

2022

Ulker, Sevkan; Guden, Mustafa

The effect of the temperature of heat treatment process and the concentration and duration of acid leaching on the size and crystallinity of nano-silica powders formed by the dissociation of natural diatom frustule Journal Article

MATERIALS EXPRESS, 12 (8), pp. 1094-1107, 2022.

Abstract | Links | BibTeX

Tuzgel, F; Akbulut, E F; Guzel, E; Yucesoy, A; Sahin, S; Tasdemirci, A; Guden, M

Testing and modeling blast loading of a sandwich structure cored with a bio-inspired (balanus) core Journal Article

Thin-Walled Structures, 175 , 2022.

Abstract | Links | BibTeX

Güden, M; Alpkaya, A T; Hamat, B A; Hızlı, B; Taşdemirci, A; Tanrıkulu, A A; Yavaş, H

The quasi-static crush response of electron-beam-melt Ti6Al4V body-centred-cubic lattices: The effect of the number of cells, strut diameter and face sheet Journal Article

Strain, 58 (3), 2022.

Abstract | Links | BibTeX

Movahedi, N; Fiedler, T; Taşdemirci, A; Murch, G E; Belova, I V; Güden, M

Impact loading of functionally graded metal syntactic foams Journal Article

Materials Science and Engineering A, 839 , 2022.

Abstract | Links | BibTeX

Güden, M; Enser, S; Bayhan, M; Taşdemirci, A; Yavaş, H

The strain rate sensitive flow stresses and constitutive equations of a selective-laser-melt and an annealed-rolled 316L stainless steel: A comparative study Journal Article

Materials Science and Engineering A, 838 , 2022.

Abstract | Links | BibTeX

2021

Aydin, Murat; Bulut, Tugrul; Guden, Mustafa; Erel, Nuri

Transdiscal screw fixation in L5-S1 spondylolysis: A biomechanical study Transdiscal screw fixation in L5-51 spondylolysis Journal Article

ANNALS OF CLINICAL AND ANALYTICAL MEDICINE, 12 (9), pp. 1055-1057, 2021.

Abstract | Links | BibTeX

Enser, S; Yavas, H; Hamat, B A; Aydın, H; Kafadar, G; Tanrıkulu, A A; Kazdal, H Z; Ozturk, F; Güden, M

Comparing Compression Deformation and Rate Sensitivity of Additively Manufactured and Extruded-Annealed 316L Alloys Journal Article

Journal of Materials Engineering and Performance, 30 (12), pp. 8831-8840, 2021.

Abstract | Links | BibTeX

Polat, D; Güden, M

Processing and characterization of geopolymer and sintered geopolymer foams of waste glass powders Journal Article

Construction and Building Materials, 300 , 2021.

Abstract | Links | BibTeX

Shi, C; Guo, B; Sarıkaya, M; Çelik, M; Chen, P; Güden, M

Determination of the material model and damage parameters of a carbon fiber reinforced laminated epoxy composite for high strain rate planar compression Journal Article

International Journal of Impact Engineering, 149 , 2021.

Abstract | Links | BibTeX

Güden, M; Canbaz, İ

The effect of cell wall material strain and strain-rate hardening behaviour on the dynamic crush response of an aluminium multi-layered corrugated core Journal Article

International Journal of Crashworthiness, 26 (1), pp. 38-52, 2021.

Abstract | Links | BibTeX

Güden, M; Yavaş, H; Tanrıkulu, A A; Taşdemirci, A; Akın, B; Enser, S; Karakuş, A; Hamat, B A

Orientation dependent tensile properties of a selective-laser-melt 316L stainless steel Journal Article

Materials Science and Engineering A, 824 , 2021.

Abstract | Links | BibTeX

Seven, S B; Çankaya, M A; Uysal, Ç; Tasdemirci, A; Saatçi, S; Güden, M

Constitutive equation determination and dynamic numerical modelling of the compression deformation of concrete Journal Article

Strain, 57 (2), 2021.

Abstract | Links | BibTeX

2020

Zeren, Dogus; Senturk, Ufuk; Guden, Mustafa

The expansion behavior of slurries containing recycled glass powder carboxymethyl cellulose, lime and aluminum powder Journal Article

CONSTRUCTION AND BUILDING MATERIALS, 240 , 2020, ISSN: 0950-0618.

Abstract | Links | BibTeX

Kilicaslan, Cenk; Guden, Mustafa

The effect of core height on energy absorbing capacity in aluminum corrugated sandwich panels Journal Article

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 35 (1), pp. 17-26, 2020, ISSN: 1300-1884.

Abstract | Links | BibTeX

Seven, Semih Berk; Cankaya, Alper M; Uysal, Cetin; Tasdemirci, Alper; Saatci, Selcuk; Guden, Mustafa

Constitutive equation determination and dynamic numerical modelling of the compression deformation of concrete Journal Article

STRAIN, 2020, ISSN: 0039-2103.

Abstract | Links | BibTeX

2017

Odac, Ismet Kutlay; Guden, Mustafa; Klcaslan, Cenk; Tasdemirci, Alper

The varying densification strain in a multi-layer aluminum corrugate structure: Direct impact testing and layer-wise numerical modelling Journal Article

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 103 , pp. 64-75, 2017, ISSN: 0734-743X.

Abstract | Links | BibTeX

Zeren, Dogus; Guden, Mustafa

The increased compression strength of an epoxy resin with the addition of heat-treated natural nano-structured diatom frustules Journal Article

JOURNAL OF COMPOSITE MATERIALS, 51 (12), pp. 1681-1691, 2017, ISSN: 0021-9983.

Abstract | Links | BibTeX

2016

Turkan, Ugur; Guden, Mustafa; Sudagidan, Mert

Staphylococcus epidermidis adhesion on surface-treated open-cell Ti6Al4V foams Journal Article

BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK, 61 (3), pp. 299-307, 2016, ISSN: 0013-5585.

Abstract | Links | BibTeX

Tasdemirci, Alper; Kara, Ali; Turan, Kivanc; Sahin, Selim; Guden, Mustafa

Effect of heat treatment on the blast loading response of combined geometry shell core sandwich structures Journal Article

THIN-WALLED STRUCTURES, 100 , pp. 180-191, 2016, ISSN: 0263-8231.

Abstract | Links | BibTeX

2014

Demir, Mustafa M; Horzum, Nesrin; Tasdemirci, Alper; Turan, Kivanc; Guden, Mustafa

Mechanical Interlocking between Porous Electrospun Polystyrene Fibers and an Epoxy Matrix Journal Article

ACS APPLIED MATERIALS & INTERFACES, 6 (24), pp. 21901-21905, 2014, ISSN: 1944-8244.

Links | BibTeX

Kilicaslan, C; Odaci, I K; Tasdemirci, A; Guden, M

Experimental Testing and Full and Homogenized Numerical Models of the Low Velocity and Dynamic Deformation of the Trapezoidal Aluminium Corrugated Core Sandwich Journal Article

STRAIN, 50 (3), pp. 236-249, 2014, ISSN: 1475-1305.

Abstract | Links | BibTeX

Ozyildiz, Figen; Uzel, Atac; Hazar, Ayse Serpil; Guden, Mustafa; Olmez, Sultan; Aras, Isil; Karaboz, Ismail

Photocatalytic antimicrobial effect of TiO2 anatase thin-film-coated orthodontic arch wires on 3 oral pathogens Journal Article

TURKISH JOURNAL OF BIOLOGY, 38 (2), pp. 289-295, 2014, ISSN: 1300-0152.

Abstract | Links | BibTeX

2013

Attila, Yigit; Guden, Mustafa; Tasdemirci, Alper

Foam glass processing using a polishing glass powder residue Journal Article

CERAMICS INTERNATIONAL, 39 (5), pp. 5869-5877, 2013, ISSN: 0272-8842.

Abstract | Links | BibTeX

Cakircali, Metin; Kilicaslan, Cenk; Guden, Mustafa; Kiranli, Engin; Shchukin, Valery Y; Petronko, Vladimir V

Cross wedge rolling of a Ti6Al4V (ELI) alloy: the experimental studies and the finite element simulation of the deformation and failure Journal Article

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 65 (9-12), pp. 1273-1287, 2013, ISSN: 0268-3768.

Abstract | Links | BibTeX

Kesici, Kutsal; Tuney, Inci; Zeren, Dogus; Guden, Mustafa; Sukatar, Atakan

Morphological and molecular identification of pennate diatoms isolated from Urla, Izmir, coast of the Aegean Sea Journal Article

TURKISH JOURNAL OF BIOLOGY, 37 (5), pp. 530-537, 2013, ISSN: 1300-0152.

Abstract | Links | BibTeX

Gulturk, E A; Guden, M; Tasdemirci, A

Calcined and natural frustules filled epoxy matrices: The effect of volume fraction on the tensile and compression behavior Journal Article

COMPOSITES PART B-ENGINEERING, 44 (1), pp. 491-500, 2013, ISSN: 1359-8368.

Abstract | Links | BibTeX

2012

Tasdemirci, A; Turan, A K; Guden, M

The effect of strain rate on the mechanical behavior of Teflon foam Journal Article

POLYMER TESTING, 31 (6), pp. 723-727, 2012, ISSN: 0142-9418.

Abstract | Links | BibTeX

Savaci, Umut; Yilmaz, Sinan; Guden, Mustafa

Open cell lead foams: processing, microstructure, and mechanical properties Journal Article

JOURNAL OF MATERIALS SCIENCE, 47 (15), pp. 5646-5654, 2012, ISSN: 0022-2461.

Abstract | Links | BibTeX

Tasdemirci, A; Tunusoglu, G; Guden, M

The effect of the interlayer on the ballistic performance of ceramic/composite armors: Experimental and numerical study Journal Article

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 44 , pp. 1-9, 2012, ISSN: 0734-743X.

Abstract | Links | BibTeX

Odaci, Ismet Kutlay; Kilicaslan, Cenk; Tasdemirci, Alper; Guden, Mustafa

Projectile impact testing of glass fiber-reinforced composite and layered corrugated aluminium and aluminium foam core sandwich panels: a comparative study Journal Article

INTERNATIONAL JOURNAL OF CRASHWORTHINESS, 17 (5), pp. 508-518, 2012, ISSN: 1358-8265.

Abstract | Links | BibTeX

2011

Turkan, Ugur; Guden, Mustafa

The effect of surface treatment on CaP deposition of Ti6Al4V open cell foams in SBF solution (vol 39, pg 1805, 2010) Journal Article

CERAMICS INTERNATIONAL, 37 (2), pp. 693, 2011, ISSN: 0272-8842.

Links | BibTeX

Durmus, A; Guden, M; Gulcimen, B; Ulku, S; Musa, E

Experimental investigations on the ballistic impact performances of cold rolled sheet metals Journal Article

MATERIALS & DESIGN, 32 (3), pp. 1356-1366, 2011, ISSN: 0261-3069.

Abstract | Links | BibTeX

Toksoy, A K; Guden, M

The optimisation of the energy absorption of partially Al foam-filled commercial 1050H14 and 6061T4 Al crash boxes Journal Article

INTERNATIONAL JOURNAL OF CRASHWORTHINESS, 16 (1), pp. 97-109, 2011, ISSN: 1358-8265.

Abstract | Links | BibTeX

2010

Turkan, U; Guden, M

The effect of nitric acid surface treatment on CaP deposition of Ti6Al4V open-cell foams in SBF solution Journal Article

SURFACE & COATINGS TECHNOLOGY, 205 (7), pp. 1904-1916, 2010, ISSN: 0257-8972.

Abstract | Links | BibTeX

Turkan, Ugur; Guden, Mustafa

The effect of surface treatment on CaP deposition of Ti6Al4V open cell foams in SBF solution Journal Article

CERAMICS INTERNATIONAL, 36 (6), pp. 1805-1816, 2010, ISSN: 0272-8842.

Abstract | Links | BibTeX

Ozyildiz, E; Guden, M; Uzel, A; Karaboz, I; Akil, O; Bulut, H

Antimicrobial Activity of TiO2-coated Orthodontic Ceramic Brackets against Streptococcus mutans and Candida albicans Journal Article

BIOTECHNOLOGY AND BIOPROCESS ENGINEERING, 15 (4), pp. 680-685, 2010, ISSN: 1226-8372.

Abstract | Links | BibTeX

Toksoy, A K; Guden, M

Partial Al foam filling of commercial 1050H14 Al crash boxes: The effect of box column thickness and foam relative density on energy absorption Journal Article

THIN-WALLED STRUCTURES, 48 (7), pp. 482-494, 2010, ISSN: 0263-8231.

Abstract | Links | BibTeX

Tasdemirci, A; Ergonenc, C; Guden, M

Split Hopkinson pressure bar multiple reloading and modeling of a 316 L stainless steel metallic hollow sphere structure Journal Article

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 37 (3), pp. 250-259, 2010, ISSN: 0734-743X.

Abstract | Links | BibTeX

2008

Tirtom, Ismail; Guden, Mustafa; Yilidz, Hasan

Simulation of the strain rate sensitive flow behavior of SiC-particulate reinforced aluminum metal matrix composites Journal Article

COMPUTATIONAL MATERIALS SCIENCE, 42 (4), pp. 570-578, 2008, ISSN: 0927-0256.

Abstract | Links | BibTeX

Tasdemirci, A; Yuksel, S; Karsu, D; Gulturk, E; Hall, I W; Guden, M

Diatom frustule-filled epoxy: Experimental and numerical study of the quasi-static and high strain rate compression behavior Journal Article

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 480 (1-2), pp. 373-382, 2008, ISSN: 0921-5093.

Abstract | Links | BibTeX

77 entries « 1 of 2 »

Öğr. Gör. Dr. Özgür Günelsu

Eğitim

Lisans: Ortadoğu Teknik Üniversitesi, Türkiye, Makina Mühendisliği, 2003
Yüksek Lisans: İstanbul Teknik Üniversitesi, Türkiye, Otomotiv Mühendisliği, 2006
Doktora:İstanbul Teknik Üniversitesi, Türkiye, Otomotiv Mühendisliği, 2016

Çalışma Alanları

  • Piston İkincil Dinamiği ve Yağlama
  • +90 232 750 6762
  • +90 232 750 6701
  • Makina Mühendisliği Binası (101)

2014

Gunelsu, Ozgur; Akalin, Ozgen

The Effects of Piston Skirt Profiles on Secondary Motion and Friction Journal Article

JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 136 (6), 2014, ISSN: 0742-4795.

Abstract | Links | BibTeX

Doç. Dr. Sinan Kandemir

Eğitim

Lisans: Balıkesir Üniversitesi, Türkiye, Makina Mühendisliği, 2006
Yüksek Lisans: Leicester Üniversitesi, Birleşik Krallık, Makina Mühendisliği, 2009
Doktora: Leicester Üniversitesi, Birleşik Krallık, Makina Mühendisliği, 2013

Çalışma Alanları

  • Hafif alaşımlar
  • Kompozit malzemeler
  • Metal matrisli kompozitler/nanomalzemeler
  • İmalat yöntemleri (döküm, metallerin yarı-katı şekillendirilmesi)
  • Mekanik testler
  • Malzeme karakterizasyonu
  • İleri elektron mikroskobisi
  • Triboloji
  • +90 232 750 6787
  • +90 232 750 6701
  • Makina Mühendisliği Binası (Z16)

2023

Kandemir, Sinan; Bohlen, Jan; Dieringa, Hajo

Influence of recycled carbon fiber addition on the microstructure and creep response of extruded AZ91 magnesium alloy Journal Article

Journal of Magnesium and Alloys, 11 (7), pp. 2518 – 2529, 2023, (All Open Access, Gold Open Access).

Abstract | Links | BibTeX

2021

Kangal, Serkan; Say, Harun A; Ayakda, Ozan; Kartav, Osman; Aydin, Levent; Artem, Secil H; Aktas, Engin; Yuceturk, Kutay; Tanoglu, Metin; Kandemir, Sinan; Beylergil, Bertan

A Comprehensive Study on Burst Pressure Performance of Aluminum Liner for Hydrogen Storage Vessels Journal Article

JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 143 (4), 2021.

Abstract | Links | BibTeX

Kandemir, S; Gavras, S; Dieringa, H

High temperature tensile, compression and creep behavior of recycled short carbon fibre reinforced AZ91 magnesium alloy fabricated by a high shearing dispersion technique Journal Article

Journal of Magnesium and Alloys, 9 (5), pp. 1753-1767, 2021.

Abstract | Links | BibTeX

Martin, S; Kandemir, S; Antonov, M

Investigation of the high temperature dry sliding wear behavior of graphene nanoplatelets reinforced aluminum matrix composites Journal Article

Journal of Composite Materials, 55 (13), pp. 1769-1782, 2021.

Abstract | Links | BibTeX

2018

Kandemir, S

Development of Graphene Nanoplatelet-Reinforced AZ91 Magnesium Alloy by Solidification Processing Journal Article

Journal of Materials Engineering and Performance, 27 (6), pp. 3014-3023, 2018.

Abstract | Links | BibTeX

Kandemir, S

Development of Graphene Nanoplatelet-Reinforced AZ91 Magnesium Alloy by Solidification Processing Journal Article

Journal of Materials Engineering and Performance, 27 (6), pp. 3014-3023, 2018.

Abstract | Links | BibTeX

2017

Kandemir, Sinan

Effects of TiB2 nanoparticle content on the microstructure and mechanical properties of aluminum matrix nanocomposites Journal Article

MATERIALS TESTING, 59 (10), pp. 844-852, 2017, ISSN: 0025-5300.

Abstract | Links | BibTeX

Kandemir, Sinan

Microstructure and mechanical properties of A357/SiC nanocomposites fabricated by ultrasonic cavitation-based dispersion of ball-milled nanoparticles Journal Article

JOURNAL OF COMPOSITE MATERIALS, 51 (3), pp. 395-404, 2017, ISSN: 0021-9983.

Abstract | Links | BibTeX

Kandemir, S

Microstructure and mechanical properties of A357/SiC nanocomposites fabricated by ultrasonic cavitation-based dispersion of ball-milled nanoparticles Journal Article

Journal of Composite Materials, 51 (3), pp. 395-404, 2017.

Abstract | Links | BibTeX

Kandemir, S

Microstructure and mechanical properties of A357/SiC nanocomposites fabricated by ultrasonic cavitation-based dispersion of ball-milled nanoparticles Journal Article

Journal of Composite Materials, 51 (3), pp. 395-404, 2017.

Abstract | Links | BibTeX

2014

Kandemir, Sinan; Atkinson, Helen V; Weston, David P; Hainsworth, Sarah V

Thixoforming of A356/SiC and A356/TiB2 Nanocomposites Fabricated by a Combination of Green Compact Nanoparticle Incorporation and Ultrasonic Treatment of the Melted Compact Journal Article

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 45A (12), pp. 5782-5798, 2014, ISSN: 1073-5623.

Abstract | Links | BibTeX

Kandemir, S; Atkinson, H V; Weston, D P; Hainsworth, S V

Thixoforming of A356/SiC and A356/TiB2 Nanocomposites Fabricated by a Combination of Green Compact Nanoparticle Incorporation and Ultrasonic Treatment of the Melted Compact Journal Article

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45 (12), pp. 5782-5798, 2014.

Abstract | Links | BibTeX

Kandemir, S; Atkinson, H V; Weston, D P; Hainsworth, S V

Thixoforming of A356/SiC and A356/TiB2 Nanocomposites Fabricated by a Combination of Green Compact Nanoparticle Incorporation and Ultrasonic Treatment of the Melted Compact Journal Article

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45 (12), pp. 5782-5798, 2014.

Abstract | Links | BibTeX

Öğr. Gör. Dr. Büşra Karaş

Eğitim

Lisans: Eskişehir Osmangazi Üniversitesi, Türkiye, Endüstri Mühendisliği, 2015
Yüksek Lisans: Newcastle Üniversitesi, İngiltere, Tasarım ve İmalat Mühendisliği, 2017
Doktora: Sheffield Üniversitesi, İngiltere, Makina Mühendisliği, 2022

Çalışma Alanları

  • Eklemeli İmalat (Metal ve kompozit malzemeler)
  • İmalat Süreçleri
  • Üretim Sistemleri Optimizasyonu
  • Sürdürebilirlik
  • Maliyet Modellenmesi
  • +90 232 750 6783
  • +90 232 750 6701
  • Makina Mühendisliği Binası (Z15)

Prof. Dr. Gökhan Kiper

Eğitim

Lisans: Orta Doğu Teknik Üniversitesi, Türkiye, Makina Mühendisliği / Matematik, 2004
Yüksek Lisans: Orta Doğu Teknik Üniversitesi, Türkiye, Makina Mühendisliği, 2006
Doktora: Orta Doğu Teknik Üniversitesi, Türkiye, Makina Mühendisliği, 2011

Çalışma Alanları

  • Mekanizma Tekniği
  • Katlanabilir Yapılar
  • Robot Kinematiği
  • Makina Dinamiği
  • +90 232 750 6777
  • +90 232 750 6701
  • Makina Mühendisliği Binası (Z14)

2024

Liao, Yuan; Kiper, Gokhan; Krishnan, Sudarshan

Mobility analysis of tripod scissor structures using screw theory Journal Article

MECHANISM AND MACHINE THEORY, 191 , 2024.

Abstract | Links | BibTeX

2023

Gorgulu, Ibrahimcan; Dede, Mehmet Ismet Can; Kiper, Gokhan

Stiffness modeling of a 2-DoF over-constrained planar parallel mechanism Journal Article

MECHANISM AND MACHINE THEORY, 185 , 2023.

Abstract | Links | BibTeX

Aldanmaz, Ataol Behram; Ayit, Orhan; Kiper, Gökhan; Dede, Mehmet İsmet Can

Gravity compensation of a 2R1T mechanism with remote center of motion for minimally invasive transnasal surgery applications Journal Article

Robotica, 41 (3), pp. 807 – 820, 2023, (All Open Access, Green Open Access).

Abstract | Links | BibTeX

Demirel, Murat; Kiper, Gökhan; Carbone, Giuseppe; Ceccarelli, Marco

Design of a novel hybrid cable-constrained parallel leg mechanism for biped walking machines Journal Article

Robotica, 41 (6), pp. 1778 – 1793, 2023, (All Open Access, Green Open Access).

Abstract | Links | BibTeX

2022

Kiper, Gokhan; Korkmaz, Koray; Gur, Sebnem; Uncu, Mujde Yar; Maden, Feray; Akgun, Yenal; Karagoz, Cevahir

Loop based classification of planar scissor linkages Journal Article

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 47 (1), 2022.

Abstract | Links | BibTeX

Maral, M O; Korkmaz, K; Kiper, G

A NOVEL DESIGN METHOD OF DEPLOYABLE SEMI-REGULAR TESSELLATED SURFACES WITH PLANO-SPHERICAL UNITS Journal Article

Journal of the International Association for Shell and Spatial Structures, 63 (3), pp. 189-202, 2022.

Abstract | Links | BibTeX

Özen, G; Kiper, G; Korkmaz, K

DESIGN OF DEMOUNTABLE RECIPROCAL FRAMES WITH NEW GEOMETRIC PROPERTIES Journal Article

Journal of the International Association for Shell and Spatial Structures, 63 (3), pp. 203-212, 2022.

Abstract | Links | BibTeX

Boztaş, S; Kiper, G

Enumeration and instantaneous mobility analysis of a class of 3-UPU parallel manipulators with equilateral triangular platforms Journal Article

Robotica, 40 (5), pp. 1538-1569, 2022.

Abstract | Links | BibTeX

2021

Kumtepe, Elvan Doğan; Kiper, Gökhan

Design, prototyping and tests of a rollable ramp for temporary use Journal Article

Sadhana - Academy Proceedings in Engineering Sciences, 46 (4), 2021.

Abstract | Links | BibTeX

Dede, M I C; Kiper, G; Ayav, T; Ozdemirel, B; Tatlıcıoglu, E; Hanalioglu, S; Işıkay, I; Berker, M

Human–robot interfaces of the neuroboscope: A minimally invasive endoscopic pituitary tumor surgery robotic assistance system Journal Article

Journal of Medical Devices, Transactions of the ASME, 15 (1), 2021.

Abstract | Links | BibTeX

2020

Yasir, Abdullah; Kiper, Gokhan; Dede, Can M I

Kinematic design of a non-parasitic 2R1T parallel mechanism with remote center of motion to be used in minimally invasive surgery applications Journal Article

MECHANISM AND MACHINE THEORY, 153 , 2020, ISSN: 0094-114X.

Abstract | Links | BibTeX

2019

Gur, Sebnem; Korkmaz, Koray; Kiper, Gokhan

DESIGN OF ANTI-PARALLELOGRAM LOOP ASSEMBLIES Journal Article

JOURNAL OF THE INTERNATIONAL ASSOCIATION FOR SHELL AND SPATIAL STRUCTURES, 60 (3), pp. 232-240, 2019, ISSN: 1028-365X.

Abstract | Links | BibTeX

Maden, Feray; Akgun, Yenal; Kiper, Gokhan; Gur, Sebnem; Yar, Mujde; Korkmaz, Koray

A CRITICAL REVIEW ON CLASSIFICATION AND TERMINOLOGY OF SCISSOR STRUCTURES Journal Article

JOURNAL OF THE INTERNATIONAL ASSOCIATION FOR SHELL AND SPATIAL STRUCTURES, 60 (1, SI), pp. 47-64, 2019, ISSN: 1028-365X.

Abstract | Links | BibTeX

2017

Kiper, Gokhan; Dede, Mehmet Ismet Can; Maaroof, Omar W; Ozkahya, Merve

Function generation with two loop mechanisms using decomposition and correction method Journal Article

MECHANISM AND MACHINE THEORY, 110 , pp. 16-26, 2017, ISSN: 0094-114X.

Abstract | Links | BibTeX

Atarer, F; Korkmaz, K; Kiper, G

Design alternatives of network of Altmann linkages Journal Article

International Journal of Computational Methods and Experimental Measurements, 5 (4), pp. 495-503, 2017.

Abstract | Links | BibTeX

Yar, M; Korkmaz, K; Kiper, G; Maden, F; Akgün, Y; Aktaş, E

A novel planar scissor structure transforming between concave and convex configurations Journal Article

International Journal of Computational Methods and Experimental Measurements, 5 (4), pp. 442-450, 2017.

Abstract | Links | BibTeX

2016

Uzunoglu, Emre; Dede, Mehmet Ismet Can; Kiper, Gokhan

Trajectory planning for a planar macro-micro manipulator of a laser-cutting machine Journal Article

INDUSTRIAL ROBOT-THE INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH AND APPLICATION, 43 (5, SI), pp. 513-523, 2016, ISSN: 0143-991X.

Abstract | Links | BibTeX

2015

Kiper, Gokhan; Bilgincan, Tunc

Function generation synthesis of spherical 5R mechanism with regional spacing and Chebyshev approximation Journal Article

MECHANISM AND MACHINE THEORY, 90 , pp. 37-46, 2015, ISSN: 0094-114X.

Abstract | Links | BibTeX

2014

Alizade, Rasim I; Kiper, Gokhan; Bagdadioglu, Baris; Dede, Can M I

Function synthesis of Bennett 6R mechanisms using Chebyshev approximation Journal Article

MECHANISM AND MACHINE THEORY, 81 , pp. 62-78, 2014, ISSN: 0094-114X.

Abstract | Links | BibTeX

2013

Kiper, G; Söylemez, E

Polyhedral linkages obtained as assemblies of planar link groups Journal Article

Frontiers of Mechanical Engineering, 8 (1), pp. 3-9, 2013.

Abstract | Links | BibTeX

Kiper, Gökhan; Bilgincan, Tunç; Dede, Mehmet İsmet Can

Function generation synthesis of planar 5R mechanism Journal Article

2013.

Abstract | Links | BibTeX

2012

Kiper, Gökhan; Soylemez, Eres

Homothetic Jitterbug-like linkages Journal Article

MECHANISM AND MACHINE THEORY, 51 , pp. 145-158, 2012, ISSN: 0094-114X.

Abstract | Links | BibTeX

2010

Akgun, Yenal; Gantes, Charis J; Kalochairetis, Konstantinos E; Kiper, Gokhan

A novel concept of convertible roofs with high transformability consisting of planar scissor-hinge structures Journal Article

ENGINEERING STRUCTURES, 32 (9), pp. 2873-2883, 2010, ISSN: 0141-0296.

Abstract | Links | BibTeX

2008

Kiper, Gökhan; Soylemez, Eres; Kisisel, Özgür A U

A family of deployable polygons and polyhedra Journal Article

MECHANISM AND MACHINE THEORY, 43 (5), pp. 627-640, 2008, ISSN: 0094-114X.

Abstract | Links | BibTeX

Dr. Araş. Gör. Ayşe Korucu

Eğitim

Lisans: Kocaeli Üniversitesi, Makina Mühendisliği, 2007
Yüksek Lisans: Clemson Üniversitesi, Makina Mühendisliği, 2011
Doktora:Clemson Üniversitesi, Makina Mühendisliği, 2016

Çalışma Alanları

  • CFD
  • Akışkanlar Mekaniği
  • Turbülanslı yanma modelleme
  • +90 232 750 6759
  • +90 232 750 6701
  • Makina Mühendisliği Binası (Z27)

2023

Benim, Ali Cemal; Korucu, Ayse

Computational investigation of non-premixed hydrogen-air laminar flames Journal Article

International Journal of Hydrogen Energy, 2023.

Abstract | Links | BibTeX

Korucu, Ayşe; Miller, Richard

Differential diffusion and pressure effects on heavily sooting 2D Kerosene/Air shear flames; [Yüksek derecede kurum üreten 2B Gazyağı/Hava difüzyon alevleri üzerinde diferansiyel difüzyonun ve basıncın etkileri] Journal Article

Journal of the Faculty of Engineering and Architecture of Gazi University, 39 (1), pp. 91 – 99, 2023, (All Open Access, Bronze Open Access).

Abstract | Links | BibTeX

2015

Ma, Zhiyuan; Korucu, Ayse; Miller, Richard Steven

A priori analysis of subgrid scale pressure and heat flux in high pressure mixing and reacting shear layers Journal Article

COMBUSTION THEORY AND MODELLING, 19 (6), pp. 807-832, 2015, ISSN: 1364-7830.

Abstract | Links | BibTeX

Doç. Dr. Şenay Mihçin

Eğitim

Lisans: Orta Doğu Teknik Üniversitesi, Makina Mühendisliği, 2001
Yüksek Lisans: Sabancı Universitesi-Sanayi Liderleri Programı Çift Yüksek Lisans Mekatronik ve Yönetim Bilimleri, 2003
Doktora: Hesaplamalı Biyomekanik, Loughborough Universitesi, Birleşik Krallık, 2008

Çalışma Alanları

  • Biyomekanik, Doğrulama, Gerçekleme
  • Translasyonel Araştırmalar (Klinik Öncesi)
  • Hareket Analizleri, Simulasyonları
  • Sonlu Elemanlar
  • ISO13485 Kalitelendirme
  • Implant Tasarımı
  • Çarpma Simulasyonları
  • +90 232 750 6701
  • Makina Mühendisliği Binası (K1-13)

2023

Mihcin, Senay; Sahin, Ahmet Mert; Yilmaz, Mehmet; Alpkaya, Alican Tuncay; Tuna, Merve; Akdeniz, Sevinc; Korkmaz, Nuray Can; Tosun, Aliye; Sahin, Serap

Database covering the prayer movements which were not available previously Journal Article

Scientific Data, 10 (1), 2023, (All Open Access, Gold Open Access, Green Open Access).

Abstract | Links | BibTeX

Alpkaya, Alican Tuncay; Mihcin, Senay

Dynamic computational wear model of PEEK-on-XLPE bearing couple in total hip replacements Journal Article

Medical Engineering and Physics, 117 , 2023.

Abstract | Links | BibTeX

Torabnia, Shams; Mihcin, Senay; Lazoglu, Ismail

Design and manufacturing of a hip joint motion simulator with a novel modular design approach Journal Article

International Journal on Interactive Design and Manufacturing, 2023, (All Open Access, Green Open Access).

Abstract | Links | BibTeX

Alpkaya, Alican Tuncay; Mihçin, Şenay

The Computational Approach to Predicting Wear: Comparison of Wear Performance of CFR-PEEK and XLPE Liners in Total Hip Replacement Journal Article

Tribology Transactions, 66 (1), pp. 59 – 72, 2023.

Abstract | Links | BibTeX

2022

Yu, Hao; Feng, Zhihong; Wang, Ling; Mihcin, Senay; Kang, Jianfeng; Bai, Shizhu; Zhao, Yimin

Finite Element Study of PEEK Materials Applied in Post-Retained Restorations Journal Article

POLYMERS, 14 (16), 2022.

Abstract | Links | BibTeX

Mihcin, Senay

Simultaneous validation of wearable motion capture system for lower body applications: over single plane range of motion (ROM) and gait activities Journal Article

BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK, 67 (3), pp. 185-199, 2022.

Abstract | Links | BibTeX

Mihcin, Senay; Ciklacandir, Samet

TOWARDS INTEGRATION OF THE FINITE ELEMENT MODELING TECHNIQUE INTO BIOMEDICAL ENGINEERING EDUCATION Journal Article

BIOMEDICAL ENGINEERING-APPLICATIONS BASIS COMMUNICATIONS, 34 (02), 2022.

Abstract | Links | BibTeX

Ciklacandir, S; Mihcin, S; Isler, Y

Detailed Investigation of Three-Dimensional Modeling and Printing Technologies from Medical Images to Analyze Femoral Head Fractures Using Finite Element Analysis Journal Article

IRBM, 43 (6), pp. 604-613, 2022.

Abstract | Links | BibTeX

2021

Mihcin, Senay; Ciklacandir, Samet; Kocak, Mertcan; Tosun, Aliye

Wearable Motion Capture System Evaluation for Biomechanical Studies for Hip Joints Journal Article

JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 143 (4), 2021.

Abstract | Links | BibTeX

2017

Mihcin, Senay; Karakitsios, Ioannis; Le, Nhan; Strehlow, Jan; Demedts, Daniel; Schwenke, Michael; Haase, Sabrina; Preusser, Tobias; Melzer, Andreas

Methodology on quantification of sonication duration for safe application of MR guided focused ultrasound for liver tumour ablation Journal Article

COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE, 152 , pp. 125-130, 2017, ISSN: 0169-2607.

Links | BibTeX

Schwenke, Michael; Strehlow, Jan; Demedts, Daniel; Haase, Sabrina; Romero, Diego Barrios; Rothluebbers, Sven; von Dresky, Caroline; Zidowitz, Stephan; Georgii, Joachim; Mihcin, Senay; Bezzi, Mario; Tanner, Christine; Sat, Giora; Levy, Yoav; Jenne, Juergen; Guenther, Matthias; Melzer, Andreas; Preusser, Tobias

A focused ultrasound treatment system for moving targets (part I): generic system design and in-silico first-stage evaluation Journal Article

JOURNAL OF THERAPEUTIC ULTRASOUND, 5 , pp. 1-14, 2017, ISSN: 2050-5736.

Links | BibTeX

Karakitsios, Ioannis; Joy, Joyce; Mihcin, Senay; Melzer, Andreas

Acoustic characterization of Thiel liver for magnetic resonance-guided focused ultrasound treatment Journal Article

MINIMALLY INVASIVE THERAPY & ALLIED TECHNOLOGIES, 26 (2), pp. 92-96, 2017, ISSN: 1364-5706.

Links | BibTeX

2016

Mihcin, Senay

Spinal curvature for the assessment of spinal stability Journal Article

INTERNATIONAL JOURNAL OF BIOMEDICAL ENGINEERING AND TECHNOLOGY, 20 (3), pp. 226-242, 2016, ISSN: 1752-6418.

Links | BibTeX

Karakitsios, Ioannis; Mihcin, Senay; Saliev, Timur; Melzer, Andreas

Feasibility study of pre-clinical Thiel embalmed human cadaver for MR-guided focused ultrasound of the spine Journal Article

MINIMALLY INVASIVE THERAPY & ALLIED TECHNOLOGIES, 25 (3), pp. 154-161, 2016, ISSN: 1364-5706.

Links | BibTeX

0000

Alpkaya, Alican Tuncay; Mihcin, Senay

The Computational Approach to Predicting Wear: Comparison of Wear Performance of CFR-PEEK and XLPE Liners in Total Hip Replacement Journal Article

TRIBOLOGY TRANSACTIONS, 0000.

Abstract | Links | BibTeX

Alpkaya, Alican Tuncay; Mihcin, Senay

The Computational Approach to Predicting Wear: Comparison of Wear Performance of CFR-PEEK and XLPE Liners in Total Hip Replacement Journal Article

TRIBOLOGY TRANSACTIONS, 0000.

Abstract | Links | BibTeX

Prof. Dr. Serhan Özdemir

Eğitim

Lisans: Dokuz Eylül Üniversitesi, Türkiye, Makina Mühendisliği, 1991
Yüksek Lisans: İllinois Teknoloji Enstitüsü, ABD, Makina ve Uzay Mühendisliği, 1996
Doktora: Florida Üniversitesi, ABD, Makina Mühendisliği, 1999

Çalışma Alanları

  • Makina Sağlığı ve Hata Teşhisi
  • Akıllı Kontrol
  • Akıllı Modelleme
  • +90 232 750 6773
  • +90 232 750 6701
  • Makina Mühendisliği Binası (116)

2017

Kosun, Caglar; Ozdemir, Serhan

Determining the complexity of multi-component conformal systems: A platoon-based approach Journal Article

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS, 471 , pp. 688-695, 2017, ISSN: 0378-4371.

Abstract | Links | BibTeX

Kosun, Caglar; Ozdemir, Serhan

An entropy-based analysis of lane changing behavior: An interactive approach Journal Article

TRAFFIC INJURY PREVENTION, 18 (4), pp. 441-447, 2017, ISSN: 1538-9588.

Abstract | Links | BibTeX

2016

Kosun, Caglar; Ozdemir, Serhan

A superstatistical model of vehicular traffic flow Journal Article

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS, 444 , pp. 466-475, 2016, ISSN: 0378-4371.

Abstract | Links | BibTeX

2015

Kosun, Caglar; Celik, Huseyin Murat; Ozdemir, Serhan

AN ANALYSIS OF VEHICULAR TRAFFIC FLOW USING LANGEVIN EQUATION Journal Article

PROMET-TRAFFIC & TRANSPORTATION, 27 (4), pp. 317-324, 2015, ISSN: 0353-5320.

Abstract | Links | BibTeX

2011

Gezgin, Erkin; Ozdemir, Serhan

Classification of manipulators of the same origin by virtue of compactness and complexity Journal Article

MECHANISM AND MACHINE THEORY, 46 (10), pp. 1425-1433, 2011, ISSN: 0094-114X.

Abstract | Links | BibTeX

Coskun, Anil; Sevil, Hakki Erhan; Ozdemir, Serhan

Cost effective localization in distributed sensory networks Journal Article

ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE, 24 (2), pp. 232-237, 2011, ISSN: 0952-1976.

Abstract | Links | BibTeX

Sevil, Hakki Erhan; Ozdemir, Serhan

Prediction of microdrill breakage using rough sets Journal Article

AI EDAM-ARTIFICIAL INTELLIGENCE FOR ENGINEERING DESIGN ANALYSIS AND MANUFACTURING, 25 (1), pp. 15-23, 2011, ISSN: 0890-0604.

Abstract | Links | BibTeX

2008

Ozdemir, Serhan

Power transmission entropy Journal Article

International Journal of Heavy Vehicle Systems, 15 (1), pp. 82–88, 2008.

BibTeX

2007

Ozdemir, Serhan

Measures of uncertainty in power split systems Journal Article

MECHANISM AND MACHINE THEORY, 42 (2), pp. 159-167, 2007, ISSN: 0094-114X.

Abstract | Links | BibTeX

2006

Alpay, S; Bilir, L; Ozdemir, S; Ozerdem, B

Wind speed time series characterization by Hilbert transform Journal Article

INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 30 (5), pp. 359-364, 2006, ISSN: 0363-907X.

Abstract | Links | BibTeX

2005

Atan, E; Ozdemir, S

Intelligence modeling of the transient asperity temperatures in meshing spur gears Journal Article

MECHANISM AND MACHINE THEORY, 40 (1), pp. 119-127, 2005, ISSN: 0094-114X.

Abstract | Links | BibTeX

Ozdemir, S

Local sparse coding control of CVPSTs Journal Article

INTERNATIONAL JOURNAL OF HEAVY VEHICLE SYSTEMS, 12 (2), pp. 104-120, 2005, ISSN: 1744-232X.

Abstract | Links | BibTeX

2004

Boke, H; Akkurt, S; Ozdemir, S; Gokturk, EH; Saltik, ENC

Quantification of CaCO3-CaSO3 center dot 0.5H(2)O-CaSO4 center dot 2H(2)O mixtures by FTIR analysis and its ANN model Journal Article

MATERIALS LETTERS, 58 (5), pp. 723-726, 2004, ISSN: 0167-577X.

Abstract | Links | BibTeX

2003

Tayfur, G; Ozdemir, S; Singh, VP

Fuzzy logic algorithm for runoff-induced sediment transport from bare soil surfaces Journal Article

ADVANCES IN WATER RESOURCES, 26 (12), pp. 1249-1256, 2003, ISSN: 0309-1708.

Abstract | Links | BibTeX

Akkurt, S; Ozdemir, S; Tayfur, G; Akyol, B

The use of GA-ANNs in the modelling of compressive strength of cement mortar Journal Article

CEMENT AND CONCRETE RESEARCH, 33 (7), pp. 973-979, 2003, ISSN: 0008-8846.

Abstract | Links | BibTeX

Doç. Dr. Ünver Özkol

Eğitim

Lisans: İstanbul Teknik Üniversitesi, Türkiye, Makina Mühendisliği, 1991
Yüksek Lisans: Illinois Teknoloji Enstitüsü, ABD, Makina ve Uzay Mühendisliği, 1996
Doktora: Illinois Teknoloji Enstitüsü, ABD, Makina ve Uzay Mühendisliği, 2002

Çalışma Alanları

  • Makinalardaki Türbulanslı ve Ayrık Akış
  • Deneysel Akışkanlar Mekaniği (Optik Teknikler, Termal Anemometri ve akış görüntüleme)
  • Isı Transferi İyileştirme, Elektronik Ekipmanların tek ve çoklu faz ısı transferi ile soğutulması
  • +90 232 750 6770
  • +90 232 750 6701
  • Makina Mühendisliği Binası (113)

2022

Ulu, A; Yildiz, G; Rodriguez, A D; Özkol, Ü

Spray Analysis of Biodiesels Derived from Various Biomass Resources in a Constant Volume Spray Chamber Journal Article

ACS Omega, 7 (23), pp. 19365-19379, 2022.

Abstract | Links | BibTeX

Ulu, A; Yildiz, G; Özkol, Ü; Rodriguez, A D

Experimental investigation of spray characteristics of ethyl esters in a constant volume chamber Journal Article

Biomass Conversion and Biorefinery, 2022.

Abstract | Links | BibTeX

2019

Acarer, Sercan; Özkol, Ünver

Off-Design Analysis of Transonic Bypass Fan Systems Using Streamline Curvature Through-Flow Method Journal Article

International Journal of Turbo and Jet Engines, 36 (2), pp. 137 – 146, 2019, (All Open Access, Green Open Access).

Abstract | Links | BibTeX

Celik, Hasan; Mobedi, Moghtada; Nakayama, Akira; Ozkol, Unver

A study on numerical determination of permeability and inertia coefficient of aluminum foam using X-ray microtomography technique: Focus on inspection methods for reliability (permeability and inertia coefficient by tomography) Journal Article

Journal of Porous Media, 22 (5), pp. 511 – 529, 2019, (All Open Access, Green Open Access).

Abstract | Links | BibTeX

2018

Kor, Orcun; Acarer, Sercan; Ozkol, Unver

Aerodynamic optimization of through-flow design model of a high by-pass transonic aero-engine fan using genetic algorithm Journal Article

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 232 (3), pp. 211-224, 2018, ISSN: 0957-6509.

Abstract | Links | BibTeX

Celik, Hasan; Mobedi, Moghtada; Nakayama, Akira; Ozkol, Unver

A numerical study on determination of volume averaged thermal transport properties of metal foam structures using X-ray microtomography technique Journal Article

Numerical Heat Transfer; Part A: Applications, 74 (7), pp. 1368 – 1386, 2018, (All Open Access, Green Open Access).

Abstract | Links | BibTeX

2017

Celik, Hasan; Mobedi, Moghtada; Manca, Oronzio; Ozkol, Unver

A pore scale analysis for determination of interfacial convective heat transfer coefficient for thin periodic porousmedia undermixed convection Journal Article

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 27 (12), pp. 2775-2798, 2017, ISSN: 0961-5539.

Abstract | Links | BibTeX

2014

Ozgumus, Turkuler; Mobedi, Moghtada; Ozkol, Unver

DETERMINATION OF KOZENY CONSTANT BASED ON POROSITY AND PORE TO THROAT SIZE RATIO IN POROUS MEDIUM WITH RECTANGULAR RODS Journal Article

ENGINEERING APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS, 8 (2), pp. 308-318, 2014, ISSN: 1994-2060.

Abstract | Links | BibTeX

2013

Ozgumus, Turkuler; Mobedi, Moghtada; Ozkol, Unver; Nakayama, Akira

Thermal Dispersion in Porous Media-A Review on the Experimental Studies for Packed Beds Journal Article

APPLIED MECHANICS REVIEWS, 65 (3), 2013, ISSN: 0003-6900.

Abstract | Links | BibTeX

2010

Mobedi, Moghtada; Ozkol, Uenver; Sunden, Bengt

Visualization of diffusion and convection heat transport in a square cavity with natural convection Journal Article

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 53 (1-3), pp. 99-109, 2010, ISSN: 0017-9310.

Abstract | Links | BibTeX

Dr. Araş. Gör. Hüseyin Sarıaltın

Eğitim

Lisans: Selçuk Üniversitesi, Makina Mühendisliği, 2006
Yüksek Lisans: Kaliforniya Üniversitesi – Riverside, Makina Mühendisliği, 2010
Doktora: Ege Üniversitesi, Güneş Enerjisi Enstitüsü, 2019

Çalışma Alanları

  • Enerji Sistem Modellemesi
  • Organik Fotovoltaik Teknolojiler
  • +90 232 750 6788
  • +90 232 750 6701
  • Makina Mühendisliği Binası, Araştırma Görevlisi Ofisi-2 (Z46)

2021

Sarialtin, H; Geyer, R; Zafer, C

Environmental assessment of transparent conductive oxide-free efficient flexible organo-lead halide perovskite solar cell Journal Article

Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 43 (20), pp. 2544-2553, 2021.

Abstract | Links | BibTeX

Prof. Dr. Metin Tanoğlu

Eğitim

Lisans: İstanbul Teknik Üniversitesi, Türkiye, Metalurji ve Malzeme Mühendisliği, 1992
Yüksek Lisans: Delaware Üniversitesi, ABD, Malzeme Bilimi ve Mühendisliği, 1996
Doktora:Delaware Üniversitesi, ABD, Malzeme Bilimi ve Mühendisliği, 2000

Çalışma Alanları

  • Kompozit Malzemeler
  • Malzemelerin Mekanik, Fiziksel, Termal ve Mikroyapı karakterizasyonu
  • Malzemelerin Darbe ve Balistik Davranışları
  • Zırh Malzemeleri
  • Gözenekleri Malzemeler
  • Nanokompozitler
  • Katmanlı Killer ve Karbon Nanotüpler
  • +90 232 765 9091
  • +90 232 750 6701
  • Makina Mühendisliği Binası (106)

56 entries « 1 of 2 »

2023

İplikçi, Hande; Barisik, Murat; Türkdoğan, Ceren; Martin, Seçkin; Yeke, Melisa; Nuhoğlu, Kaan; Esenoğlu, Gözde; Tanoğlu, Metin; Aktaş, Engin; Dehneliler, Serkan; İriş, Mehmet Erdem

Effects of nanosecond laser ablation parameters on surface modification of carbon fiber reinforced polymer composites Journal Article

Journal of Composite Materials, 57 (18), pp. 2843 – 2855, 2023.

Abstract | Links | BibTeX

Nuhoğlu, Kaan; Aktaş, Engin; Tanoğlu, Metin; Martin, Seçkin; İplikçi, Hande; Barışık, Murat; Yeke, Melisa; Türkdoğan, Ceren; Esenoğlu, Gözde; Dehneliler, Serkan; İriş, Mehmet Erdem

Analysis of adhesively bonded joints of laser surface treated composite primary components of aircraft structures Journal Article

International Journal of Adhesion and Adhesives, 126 , 2023.

Abstract | Links | BibTeX

Esenoğlu, Gözde; Tanoğlu, Metin; Barisik, Murat; İplikçi, Hande; Yeke, Melisa; Nuhoğlu, Kaan; Türkdoğan, Ceren; Martin, Seçkin; Aktaş, Engin; Dehneliler, Serkan; Gürbüz, Ahmet Ayberk; İriş, Mehmet Erdem

Investigating the Effects of PA66 Electrospun Nanofibers Layered within an Adhesive Composite Joint Fabricated under Autoclave Curing Journal Article

ACS Omega, 8 (36), pp. 32656 – 32666, 2023, (All Open Access, Gold Open Access, Green Open Access).

Abstract | Links | BibTeX

Uz, Yusuf Can; Tanoğlu, Metin

Determination of activation energy for carbon/epoxy prepregs containing carbon nanotubes by differential scanning calorimetry Journal Article

High Performance Polymers, 35 (2), pp. 166 – 180, 2023.

Abstract | Links | BibTeX

2022

Esenoğlu, G; Barisik, M; Tanoğlu, M; Yeke, M; Türkdoğan, C; İplikçi, H; Martin, S; Nuhoğlu, K; Aktaş, E; Dehneliler, S; İriş, M E

Improving adhesive behavior of fiber reinforced composites by incorporating electrospun Polyamide-6,6 nanofibers in joining region Journal Article

Journal of Composite Materials, 56 (29), pp. 4449-4459, 2022.

Abstract | Links | BibTeX

Güneş, M D; Karabaş, İmamoğlu N; Deveci, H A; Tanoğlu, G; Tanoğlu, M

Fatigue life prediction and optimization of GFRP composites based on Failure Tensor Polynomial in Fatigue model with exponential fitting approach Journal Article

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236 (19), pp. 10290-10303, 2022.

Abstract | Links | BibTeX

Üstün, Sinan H; Toksoy, Kaan A; Tanoğlu, M

Investigation of hybridization effect on ballistic performance of multi-layered fiber reinforced composite structures Journal Article

Journal of Composite Materials, 56 (15), pp. 2411-2431, 2022.

Abstract | Links | BibTeX

Uz, Y C; Tanoğlu, M

Determination of activation energy for carbon/epoxy prepregs containing carbon nanotubes by differential scanning calorimetry Journal Article

High Performance Polymers, 2022.

Abstract | Links | BibTeX

Solak, Ay Z; Kartav, O; Tanoglu, M

Enhancement of filament wound glass fiber/epoxy-based cylindrical composites by toughening with single-walled carbon nanotubes Journal Article

Polymers and Polymer Composites, 30 , 2022.

Abstract | Links | BibTeX

2021

Kangal, Serkan; Say, Harun A; Ayakda, Ozan; Kartav, Osman; Aydin, Levent; Artem, Secil H; Aktas, Engin; Yuceturk, Kutay; Tanoglu, Metin; Kandemir, Sinan; Beylergil, Bertan

A Comprehensive Study on Burst Pressure Performance of Aluminum Liner for Hydrogen Storage Vessels Journal Article

JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 143 (4), 2021.

Abstract | Links | BibTeX

Kartav, O; Kangal, S; Yücetürk, K; Tanoğlu, M; Aktaş, E; Artem, H S

Development and analysis of composite overwrapped pressure vessels for hydrogen storage Journal Article

Journal of Composite Materials, 55 (28), pp. 4141-4155, 2021.

Abstract | Links | BibTeX

2020

Beylergil, Bertan; Tanoglu, Metin; Aktas, Engin

Experimental and statistical analysis of carbon fiber/epoxy composites interleaved with nylon 6,6 nonwoven fabric interlayers Journal Article

JOURNAL OF COMPOSITE MATERIALS, 54 (27), pp. 4173-4184, 2020, ISSN: 0021-9983.

Abstract | Links | BibTeX

Ay, Z; Tanoglu, M

The Effect of Single-Walled Carbon Nanotube (SWCNT) Concentration on the Mechanical and Rheological Behavior of Epoxy Matrix Journal Article

MECHANICS OF COMPOSITE MATERIALS, 56 (4), pp. 523-532, 2020, ISSN: 0191-5665.

Abstract | Links | BibTeX

Kangal, S; Kartav, O; Tanoğlu, M; Aktaş, E; Artem, H S

Investigation of interlayer hybridization effect on burst pressure performance of composite overwrapped pressure vessels with load-sharing metallic liner Journal Article

Journal of Composite Materials, 54 (7), pp. 961-980, 2020.

Abstract | Links | BibTeX

Yardimci, Atike Ince; Tanoglu, Metin; Yilmaz, Selahattin; Selamet, Yusuf

Effect of CNT incorporation on PAN/PPy nanofibers synthesized by electrospinning method Journal Article

TURKISH JOURNAL OF CHEMISTRY, 44 (4), pp. 1002-1015, 2020, ISSN: 1300-0527.

Abstract | Links | BibTeX

2019

Beylergil, B; Tanoǧlu, M; Aktaş, E

Mode-I fracture toughness of carbon fiber/epoxy composites interleaved by aramid nonwoven veils Journal Article

Steel and Composite Structures, 31 (2), pp. 113-123, 2019.

Abstract | Links | BibTeX

2018

Oztoprak, N; Gunes, M D; Tanoglu, M; Aktas, E; Egilmez, O O; Senocak, C; Kulac, G

Developing polymer composite-based leaf spring systems for automotive industry Journal Article

Science and Engineering of Composite Materials, 25 (6), pp. 1167-1176, 2018.

Abstract | Links | BibTeX

Beylergil, B; Tanoğlu, M; Aktaş, E

Effect of polyamide-6,6 (PA 66) nonwoven veils on the mechanical performance of carbon fiber/epoxy composites Journal Article

Composite Structures, 194 , pp. 21-35, 2018.

Abstract | Links | BibTeX

2017

Beylergil, Bertan; Tanoglu, Metin; Aktas, Engin

Enhancement of interlaminar fracture toughness of carbon fiber-epoxy composites using polyamide-6,6 electrospun nanofibers Journal Article

JOURNAL OF APPLIED POLYMER SCIENCE, 134 (35), 2017, ISSN: 0021-8995.

Abstract | Links | BibTeX

Beylergil, B; Tanoğlu, M; Aktaş, E

Enhancement of interlaminar fracture toughness of carbon fiber–epoxy composites using polyamide-6,6 electrospun nanofibers Journal Article

Journal of Applied Polymer Science, 134 (35), 2017.

Abstract | Links | BibTeX

2016

Merter, Emrah N; Baser, Gulnur; Tanoglu, Metin

Effects of hybrid yarn preparation technique and fiber sizing on the mechanical properties of continuous glass fiber-reinforced polypropylene composites Journal Article

JOURNAL OF COMPOSITE MATERIALS, 50 (12, SI), pp. 1697-1706, 2016, ISSN: 0021-9983.

Abstract | Links | BibTeX

Basturk, S B; Tanoglu, M; Cankaya, M A; Egilmez, O O

Dynamic behavior predictions of fiber-metal laminate/aluminum foam sandwiches under various explosive weights Journal Article

JOURNAL OF SANDWICH STRUCTURES & MATERIALS, 18 (3), pp. 321-342, 2016, ISSN: 1099-6362.

Abstract | Links | BibTeX

Beylergil, B; Tanoǧlu, M; Aktaş, E

Modification of carbon fibre/epoxy composites by polyvinyl alcohol (PVA) based electrospun nanofibres Journal Article

Advanced Composites Letters, 25 (3), pp. 69-76, 2016.

Abstract | Links | BibTeX

Merter, Emrah N; Başer, Gülnur; Tanoğlu, Metin

Effects of hybrid yarn preparation technique and fiber sizing on the mechanical properties of continuous glass fiber-reinforced polypropylene composites Journal Article

Journal of Composite Materials, 50 (12), pp. 1697-1706, 2016.

Abstract | Links | BibTeX

Baştürk, SB; Tanoğlu, M; Çankaya, MA; Eğilmez, OÖ

Dynamic behavior predictions of fiber-metal laminate/aluminum foam sandwiches under various explosive weights Journal Article

Journal of Sandwich Structures & Materials, 18 (3), pp. 321-342, 2016.

Abstract | Links | BibTeX

2011

Basturk, Bahar S; Tanoglu, Metin

Mechanical and energy absorption behaviors of metal/polymer layered sandwich structures Journal Article

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 30 (18), pp. 1539-1547, 2011, ISSN: 0731-6844.

Abstract | Links | BibTeX

2010

Yurdakul, Hilmi; Seyhan, Tugrul A; Turan, Servet; Tanoglu, Metin; Bauhofer, Wolfgang; Schulte, Karl

Electric field effects on CNTs/vinyl ester suspensions and the resulting electrical and thermal composite properties Journal Article

COMPOSITES SCIENCE AND TECHNOLOGY, 70 (14), pp. 2102-2110, 2010, ISSN: 0266-3538.

Abstract | Links | BibTeX

Sezgin, F E; Tanoglu, M; Egilmez, O O; Donmez, C

Mechanical Behavior of Polypropylene-based Honeycomb-Core Composite Sandwich Structures Journal Article

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 29 (10), pp. 1569-1579, 2010, ISSN: 0731-6844.

Abstract | Links | BibTeX

Coskun, Selim; Ovecoglu, Lutfi M; Ozkal, Burak; Tanoglu, Metin

Characterization investigations during mechanical alloying and sintering of W-20 vol% SiC composites Journal Article

JOURNAL OF ALLOYS AND COMPOUNDS, 492 (1-2), pp. 576-584, 2010, ISSN: 0925-8388.

Abstract | Links | BibTeX

2009

Seyhan, A T; Sun, Z; Deitzel, J; Tanoglu, M; Heider, D

Cure kinetics of vapor grown carbon nanofiber (VGCNF) modified epoxy resin suspensions and fracture toughness of their resulting nanocomposites Journal Article

MATERIALS CHEMISTRY AND PHYSICS, 118 (1), pp. 234-242, 2009, ISSN: 0254-0584.

Abstract | Links | BibTeX

Seyhan, Tugrul A; Tanoglu, Metin; Schulte, Karl

Tensile mechanical behavior and fracture toughness of MWCNT and DWCNT modified vinyl-ester/polyester hybrid nanocomposites produced by 3-roll milling Journal Article

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 523 (1-2), pp. 85-92, 2009, ISSN: 0921-5093.

Abstract | Links | BibTeX

2008

Erdogan, B C; Seyhan, A T; Ocak, Y; Tanoglu, M; Balkose, D; Ulku, S

Cure kinetics of epoxy resin-natural zeolite composites Journal Article

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 94 (3), pp. 743-747, 2008, ISSN: 1388-6150, (31st International Conference on Vacuum Microbalance Techniques, Izmir Inst Technol, Izmir, TURKEY, SEP 12-14, 2007).

Abstract | Links | BibTeX

Seyhan, Tugrul A; Tanoglu, Metin; Schulte, Karl

Mode I and mode II fracture toughness of E-glass non-crimp fabric/carbon nanotube (CNT) modified polymer based composites Journal Article

ENGINEERING FRACTURE MECHANICS, 75 (18), pp. 5151-5162, 2008, ISSN: 0013-7944.

Abstract | Links | BibTeX

Rahimov, R N; Khalilova, A A; Arasly, D H; Aliyev, M I; Tanoglu, M; Ozyuzer, L

Thermostable tensoresistors of Co doped GaSb-FeGa1.3 eutectic composites Journal Article

SENSORS AND ACTUATORS A-PHYSICAL, 147 (2), pp. 436-440, 2008, ISSN: 0924-4247.

Abstract | Links | BibTeX

Kaya, Elcin; Tanoglu, Metin; Okur, Salih

Layered clay/epoxy nanocomposites: Thermomechanical, flame retardancy, and optical properties Journal Article

JOURNAL OF APPLIED POLYMER SCIENCE, 109 (2), pp. 834-840, 2008, ISSN: 0021-8995.

Abstract | Links | BibTeX

Alpöz, Riza A; Ertuḡrul, Fahinur; Cogulu, Dilsah; Ak, Asli Topaloḡlu; Tanoḡlu, Metin; ç, El

Effects of light curing method and exposure time on mechanical properties of resin based dental materials Journal Article

European journal of dentistry, 2 , pp. 37, 2008.

BibTeX

2007

Guden, M; Yueksel, S; Tasdemirci, A; Tanoglu, M

Effect of aluminum closed-cell foam filling on the quasi-static axial crush performance of glass fiber reinforced polyester composite and aluminum/composite hybrid tubes Journal Article

COMPOSITE STRUCTURES, 81 (4), pp. 480-490, 2007, ISSN: 0263-8223.

Abstract | Links | BibTeX

Bozkurt, Emrah; Kaya, Elcin; Tanoglu, Metin

Mechanical and thermal behavior of non-crimp glass fiber reinforced layered clay/epoxy nanocomposites Journal Article

COMPOSITES SCIENCE AND TECHNOLOGY, 67 (15-16), pp. 3394-3403, 2007, ISSN: 0266-3538.

Abstract | Links | BibTeX

Simsek, Yilmaz; Ozyuzer, Lutfi; Seyhan, Tugrul A; Tanoglu, Metin; Schulte, Karl

Temperature dependence of electrical conductivity in double-wall and multi-wall carbon nanotube/polyester nanocomposites Journal Article

JOURNAL OF MATERIALS SCIENCE, 42 (23), pp. 9689-9695, 2007, ISSN: 0022-2461.

Abstract | Links | BibTeX

Altay, E; Shahwan, T; Tanoglu, M

Morphosynthesis of CaCO3 at different reaction temperatures and the effects of PDDA, CTAB, and EDTA on the particle morphology and polymorph stability Journal Article

POWDER TECHNOLOGY, 178 (3), pp. 194-202, 2007, ISSN: 0032-5910.

Abstract | Links | BibTeX

Seyhan, A T; Gojny, F H; Tanoglu, M; Schulte, K

Rheological and dynamic-mechanical behavior of carbon nanotube/vinyl ester-polyester suspensions and their nanocomposites Journal Article

EUROPEAN POLYMER JOURNAL, 43 (7), pp. 2836-2847, 2007, ISSN: 0014-3057.

Abstract | Links | BibTeX

Seyhan, Tugrul A; Gojny, Florian H; Tanoglu, Metin; Schulte, Karl

Critical aspects related to processing of carbon nano tube/unsaturated thermoset polyester nanocomposites Journal Article

EUROPEAN POLYMER JOURNAL, 43 (2), pp. 374-379, 2007, ISSN: 0014-3057.

Abstract | Links | BibTeX

Tanoglu, Metin; Ergun, Yelda

Porous nanocomposites prepared from layered clay and PMMA [poly(methyl methacrylate)] Journal Article

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 38 (2), pp. 318-322, 2007, ISSN: 1359-835X.

Abstract | Links | BibTeX

2006

Celik, E; Gokcen, Z; Azem, Ak N F; Tanoglu, M; Emrullahoglu, O F

Processing, characterization and photocatalytic properties of Cu doped TiO2 thin films on glass substrate by sol-gel technique Journal Article

MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 132 (3), pp. 258-265, 2006, ISSN: 0921-5107.

Abstract | Links | BibTeX

Celik, E; Yildiz, AY; Azem, NFA; Tanoglu, M; Toparli, M; Emrullahoglu, OF; Ozdemir, I

Preparation and characterization of Fe2O3-TiO2 thin films on glass substrate for photocatalytic applications Journal Article

MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 129 (1-3), pp. 193-199, 2006, ISSN: 0921-5107.

Abstract | Links | BibTeX

Akkas, Deniz H; Ovecoglu, Lutfi M; Tanoglu, Metin

Silicon oxycarbide-based composites produced from pyrolysis of polysiloxanes with active Ti filler Journal Article

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 26 (15), pp. 3441-3449, 2006, ISSN: 0955-2219.

Abstract | Links | BibTeX

2005

Seyhan, AT; Tayfur, G; Karakurt, M; Tanoglu, M

Artificial neural network (ANN) prediction of compressive strength of VARTM processed polymer composites Journal Article

COMPUTATIONAL MATERIALS SCIENCE, 34 (1), pp. 99-105, 2005, ISSN: 0927-0256.

Abstract | Links | BibTeX

2004

Aliyev, MI; Khalilova, AA; Arasly, DH; Rahimov, RN; Tanoglu, M; Ozyuzer, L

Strain gauges of GaSb-FeGa1.3 eutectic composites Journal Article

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 79 (8), pp. 2075-2078, 2004, ISSN: 0947-8396.

Abstract | Links | BibTeX

Ergun, Y; Dirier, C; Tanoglu, M

Polymethyl methacrylate based open-cell porous plastics for high-pressure ceramic casting Journal Article

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 385 (1-2), pp. 279-285, 2004, ISSN: 0921-5093.

Abstract | Links | BibTeX

2003

Tanoglu, M; Seyhan, AT

Compressive mechanical behaviour of E-glass/polyester composite laminates tailored with a thermoplastic preforming binder Journal Article

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 363 (1-2), pp. 335-344, 2003, ISSN: 0921-5093.

Abstract | Links | BibTeX

56 entries « 1 of 2 »

Prof. Dr. Alper Taşdemirci

Eğitim

Lisans: Erciyes Universitesi, Türkiye, Makina Mühendisliği, 1998
Yüksek Lisans: Erciyes Universitesi, Türkiye, Makina Mühendisliği, 2000
Doktora: Delaware Üniversitesi, ABD, Makina Mühendisliği, 2005

Çalışma Alanları

  • Malzemelerin Statik ve Dinamik Mekanik Davranışları
  • Yüksek Şekil Değiştirme Hızı Test Yöntemleri: Split Hopkinson Basınç Barı, Düşen Ağırlık Testi
  • Malzemelerin Dinamik Davranışı ve Yapısal Modellemesi
  • Deneysel ve Hesaplamalı Mekanik, Kompozit Zırh Mekaniği
  • +90 232 750 6780
  • +90 232 750 6701
  • Makina Mühendisliği Binası (Z11)

2023

Enser, Samed; Guden, Mustafa; Tasdemirci, Alper; Davut, Kemal

The strain rate history effect in a selective-laser-melt 316L stainless steel Journal Article

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 862 , 2023.

Abstract | Links | BibTeX

Tuncer, C; Güden, M; Orhan, M; Sarıkaya, M K; Taşdemirci, A

Quasi-static and dynamic Brazilian testing and failure analysis of a deer antler in the transverse to the osteon growth direction Journal Article

Journal of the Mechanical Behavior of Biomedical Materials, 138 , 2023.

Abstract | Links | BibTeX

Enser, S; Güden, M; Taşdemirci, A; Davut, K

The strain rate history effect in a selective-laser-melt 316L stainless steel Journal Article

Materials Science and Engineering A, 862 , 2023.

Abstract | Links | BibTeX

Zeybek, M K; Güden, M; Taşdemirci, A

The Effect of Strain Rate on the Compression Behavior of Additively Manufactured Short Carbon Fiber-Reinforced Polyamide Composites with Different Layer Heights, Infill Patterns, and Built Angles Journal Article

Journal of Materials Engineering and Performance, 2023.

Abstract | Links | BibTeX

Turan, A K; Tasdemirci, A; Kara, A; Sahin, S; Guden, M

Investigation of penetration behavior of combined geometry shells at quasi-static and intermediate strain rates: An experimental and numerical study Journal Article

Thin-Walled Structures, 182 , 2023.

Abstract | Links | BibTeX

Güden, Mustafa; Riaz, Arslan Bin; Toksoy, Ahmet Kaan; Yıldıztekin, Murat; Erten, Hacer İrem; Çimen, Gülden; Hızlı, Burak; Çellek, Burçin Seven; Güleç, Efe; Taşdemirci, Alper; Yavaş, Hakan; Altınok, Sertaç

Investigation and validation of the flow stress equation and damage model parameters of an electron beam melted Ti6Al4V alloy with a martensitic phase Journal Article

Materials Science and Engineering: A, 885 , 2023.

Abstract | Links | BibTeX

Çelik, Muhammet; Güden, Mustafa; Sarıkaya, Mustafa; Taşdemirci, Alper; Genç, Cem; Ersoy, Kurtuluş; Serin, Özgür

The impact response of a Nomex® honeycomb core/E-glass/epoxy composite sandwich structure to increasing velocities: Experimental and numerical analysis Journal Article

Composite Structures, 320 , 2023.

Abstract | Links | BibTeX

Sarıkaya, Mustafa; Güden, Mustafa; Kambur, Çağdaş; Özbek, Sevim Çankaya; Taşdemirci, Alper

Development of the Johnson-Cook flow stress and damage parameters for the impact response of polycarbonate: Experimental and numerical approach Journal Article

International Journal of Impact Engineering, 179 , 2023.

Abstract | Links | BibTeX

2022

Tuzgel, F; Akbulut, E F; Guzel, E; Yucesoy, A; Sahin, S; Tasdemirci, A; Guden, M

Testing and modeling blast loading of a sandwich structure cored with a bio-inspired (balanus) core Journal Article

Thin-Walled Structures, 175 , 2022.

Abstract | Links | BibTeX

Güden, M; Alpkaya, A T; Hamat, B A; Hızlı, B; Taşdemirci, A; Tanrıkulu, A A; Yavaş, H

The quasi-static crush response of electron-beam-melt Ti6Al4V body-centred-cubic lattices: The effect of the number of cells, strut diameter and face sheet Journal Article

Strain, 58 (3), 2022.

Abstract | Links | BibTeX

Movahedi, N; Fiedler, T; Taşdemirci, A; Murch, G E; Belova, I V; Güden, M

Impact loading of functionally graded metal syntactic foams Journal Article

Materials Science and Engineering A, 839 , 2022.

Abstract | Links | BibTeX

Güden, M; Enser, S; Bayhan, M; Taşdemirci, A; Yavaş, H

The strain rate sensitive flow stresses and constitutive equations of a selective-laser-melt and an annealed-rolled 316L stainless steel: A comparative study Journal Article

Materials Science and Engineering A, 838 , 2022.

Abstract | Links | BibTeX

2021

Güden, M; Yavaş, H; Tanrıkulu, A A; Taşdemirci, A; Akın, B; Enser, S; Karakuş, A; Hamat, B A

Orientation dependent tensile properties of a selective-laser-melt 316L stainless steel Journal Article

Materials Science and Engineering A, 824 , 2021.

Abstract | Links | BibTeX

Seven, S B; Çankaya, M A; Uysal, Ç; Tasdemirci, A; Saatçi, S; Güden, M

Constitutive equation determination and dynamic numerical modelling of the compression deformation of concrete Journal Article

Strain, 57 (2), 2021.

Abstract | Links | BibTeX

2020

Seven, Semih Berk; Cankaya, Alper M; Uysal, Cetin; Tasdemirci, Alper; Saatci, Selcuk; Guden, Mustafa

Constitutive equation determination and dynamic numerical modelling of the compression deformation of concrete Journal Article

STRAIN, 2020, ISSN: 0039-2103.

Abstract | Links | BibTeX

2017

Odac, Ismet Kutlay; Guden, Mustafa; Klcaslan, Cenk; Tasdemirci, Alper

The varying densification strain in a multi-layer aluminum corrugate structure: Direct impact testing and layer-wise numerical modelling Journal Article

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 103 , pp. 64-75, 2017, ISSN: 0734-743X.

Abstract | Links | BibTeX

Tasdemirci, A; Tunusoglu, G

Experimental and numerical investigation of the effect of interlayer on the damage formation in a ceramic/composite armor at a low projectile velocity Journal Article

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 30 (1), pp. 88-106, 2017, ISSN: 0892-7057.

Abstract | Links | BibTeX

2016

Tasdemirci, Alper; Kara, Ali

The effect of perforations on the stress wave propagation characteristics of multilayered materials Journal Article

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 29 (12), pp. 1680-1695, 2016, ISSN: 0892-7057.

Abstract | Links | BibTeX

Tasdemirci, Alper; Kara, Ali; Turan, Kivanc; Sahin, Selim; Guden, Mustafa

Effect of heat treatment on the blast loading response of combined geometry shell core sandwich structures Journal Article

THIN-WALLED STRUCTURES, 100 , pp. 180-191, 2016, ISSN: 0263-8231.

Abstract | Links | BibTeX

2015

Tasdemirci, Alper; Kara, Ali; Turan, Kivanc; Sahin, Selim

Dynamic crushing and energy absorption of sandwich structures with combined geometry shell cores Journal Article

THIN-WALLED STRUCTURES, 91 , pp. 116-128, 2015, ISSN: 0263-8231.

Abstract | Links | BibTeX

Tasdemirci, Alper; Sahin, Selim; Kara, Ali; Turan, Kivanc

Crushing and energy absorption characteristics of combined geometry shells at quasi-static and dynamic strain rates: Experimental and numerical study Journal Article

THIN-WALLED STRUCTURES, 86 , pp. 83-93, 2015, ISSN: 0263-8231.

Abstract | Links | BibTeX

2014

Demir, Mustafa M; Horzum, Nesrin; Tasdemirci, Alper; Turan, Kivanc; Guden, Mustafa

Mechanical Interlocking between Porous Electrospun Polystyrene Fibers and an Epoxy Matrix Journal Article

ACS APPLIED MATERIALS & INTERFACES, 6 (24), pp. 21901-21905, 2014, ISSN: 1944-8244.

Links | BibTeX

Kilicaslan, C; Odaci, I K; Tasdemirci, A; Guden, M

Experimental Testing and Full and Homogenized Numerical Models of the Low Velocity and Dynamic Deformation of the Trapezoidal Aluminium Corrugated Core Sandwich Journal Article

STRAIN, 50 (3), pp. 236-249, 2014, ISSN: 1475-1305.

Abstract | Links | BibTeX

Kilicaslan, Cenk; Gueden, Mustafa; Odaci, Ismet Kutlay; Tasdemirci, Alper

Experimental and numerical studies on the quasi-static and dynamic crushing responses of multi-layer trapezoidal aluminum corrugated sandwiches Journal Article

THIN-WALLED STRUCTURES, 78 , pp. 70-78, 2014, ISSN: 0263-8231.

Abstract | Links | BibTeX

2013

Attila, Yigit; Guden, Mustafa; Tasdemirci, Alper

Foam glass processing using a polishing glass powder residue Journal Article

CERAMICS INTERNATIONAL, 39 (5), pp. 5869-5877, 2013, ISSN: 0272-8842.

Abstract | Links | BibTeX

Gulturk, E A; Guden, M; Tasdemirci, A

Calcined and natural frustules filled epoxy matrices: The effect of volume fraction on the tensile and compression behavior Journal Article

COMPOSITES PART B-ENGINEERING, 44 (1), pp. 491-500, 2013, ISSN: 1359-8368.

Abstract | Links | BibTeX

2012

Tasdemirci, A; Turan, A K; Guden, M

The effect of strain rate on the mechanical behavior of Teflon foam Journal Article

POLYMER TESTING, 31 (6), pp. 723-727, 2012, ISSN: 0142-9418.

Abstract | Links | BibTeX

Tasdemirci, A; Tunusoglu, G; Guden, M

The effect of the interlayer on the ballistic performance of ceramic/composite armors: Experimental and numerical study Journal Article

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 44 , pp. 1-9, 2012, ISSN: 0734-743X.

Abstract | Links | BibTeX

Odaci, Ismet Kutlay; Kilicaslan, Cenk; Tasdemirci, Alper; Guden, Mustafa

Projectile impact testing of glass fiber-reinforced composite and layered corrugated aluminium and aluminium foam core sandwich panels: a comparative study Journal Article

INTERNATIONAL JOURNAL OF CRASHWORTHINESS, 17 (5), pp. 508-518, 2012, ISSN: 1358-8265.

Abstract | Links | BibTeX

2010

Tasdemirci, A; Ergonenc, C; Guden, M

Split Hopkinson pressure bar multiple reloading and modeling of a 316 L stainless steel metallic hollow sphere structure Journal Article

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 37 (3), pp. 250-259, 2010, ISSN: 0734-743X.

Abstract | Links | BibTeX

2008

Tasdemirci, Alper

The effect of tube end constraining on the axial crushing behavior of an aluminum tube Journal Article

MATERIALS & DESIGN, 29 (10), pp. 1992-2001, 2008, ISSN: 0261-3069.

Abstract | Links | BibTeX

Tasdemirci, A; Yuksel, S; Karsu, D; Gulturk, E; Hall, I W; Guden, M

Diatom frustule-filled epoxy: Experimental and numerical study of the quasi-static and high strain rate compression behavior Journal Article

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 480 (1-2), pp. 373-382, 2008, ISSN: 0921-5093.

Abstract | Links | BibTeX

Tasdemirci, A; Hizal, A; Altindis, M; Hall, I W; Gueden, M

The effect of strain rate on the compressive deformation behavior of a sintered Ti6Al4V powder compact Journal Article

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 474 (1-2), pp. 335-341, 2008, ISSN: 0921-5093.

Abstract | Links | BibTeX

2007

Guden, M; Yueksel, S; Tasdemirci, A; Tanoglu, M

Effect of aluminum closed-cell foam filling on the quasi-static axial crush performance of glass fiber reinforced polyester composite and aluminum/composite hybrid tubes Journal Article

COMPOSITE STRUCTURES, 81 (4), pp. 480-490, 2007, ISSN: 0263-8223.

Abstract | Links | BibTeX

Tasdemirci, A; Hall, I W

The effects of plastic deformation on stress wave propagation in multi-layer materials Journal Article

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 34 (11), pp. 1797-1813, 2007, ISSN: 0734-743X.

Abstract | Links | BibTeX

2006

Guden, M; Akil, O; Tasdemirci, A; Ciftcioglu, M; Hall, I W

Effect of strain rate on the compressive mechanical behavior of a continuous alumina fiber reinforced ZE41A magnesium alloy based composite Journal Article

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 425 (1-2), pp. 145-155, 2006, ISSN: 0921-5093.

Abstract | Links | BibTeX

2004

Karamis, MB; Nair, F; Tasdemirci, A

Analyses of metallurgical behavior of Al-SiCp composites after ballistic impacts Journal Article

COMPOSITE STRUCTURES, 64 (2), pp. 219-226, 2004, ISSN: 0263-8223.

Abstract | Links | BibTeX

Tasdemirci, A; Hall, IW; Gama, BA; Guiden, M

Stress wave propagation effects in two- and three-layered composite materials Journal Article

JOURNAL OF COMPOSITE MATERIALS, 38 (12), pp. 995-1009, 2004, ISSN: 0021-9983.

Abstract | Links | BibTeX

Dr. Öğr. Üyesi Halil Tetik

Eğitim

Lisans: İzmir Yüksek Teknoloji Enstitüsü, Türkiye, Makina Mühendisliği, 2013
Yüksek Lisans: İzmir Yüksek Teknoloji Enstitüsü, Türkiye, Makina Mühendisliği, 2016
Doktora:  Kansas Eyalet Üniversitesi, ABD, Endüstri Mühendisliği, 2022

Çalışma Alanları

  • Eklemeli Üretim
  • İleri Üretim Teknikleri
  • Fonksiyonel Aerojeller ve Uygulamaları
  • +90 232 750 6781
  • +90 232 750 6701
  • Makina Mühendisliği Binası (Z12)

Dr. Öğr. Üyesi Fatih Toksoy

Eğitim

Lisans: Sakarya Üniversitesi, Türkiye, Metalurji ve Malzeme Mühendisliği, 2006
Yüksek Lisans: Rutgers Üniversitesi, ABD, Malzeme Bilimi ve Mühendisliği, 2010
Doktora: Rutgers Üniversitesi, ABD, Malzeme Bilimi ve Mühendisliği, 2014

Çalışma Alanları

  • Borür ve Karbür Malzemeler
  • Toz Sentezleme ve İşleme, Malzeme Karekterizasyonu
  • Sinterleme
  • Sert Seramikler
  • +90 232 750 6794
  • +90 232 750 6701
  • Makina Mühendisliği Binası (Z09)

2017

Ma, Luoning; Xie, Kelvin Y; Toksoy, Muhammet F; Kuwelkar, Kanak; Haber, Richard A; Hemker, Kevin J

The effect of Si on the microstructure and mechanical properties of spark plasma sintered boron carbide Journal Article

MATERIALS CHARACTERIZATION, 134 , pp. 274-278, 2017, ISSN: 1044-5803.

Abstract | Links | BibTeX

Toksoy, Muhammet Fatih; Rafaniello, William; Xie, Kelvin Yu; Ma, Luoning; Hemker, Kevin Jude; Haber, Richard Alan

Densification and characterization of rapid carbothermal synthesized boron carbide Journal Article

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 14 (3), pp. 443-453, 2017, ISSN: 1546-542X.

Abstract | Links | BibTeX

2016

An, Qi; III, William Goddard A; Xie, Kelvin Y; Sim, Gi-dong; Hemker, Kevin J; Munhollon, Tyler; Toksoy, Fatih M; Haber, Richard A

Superstrength through Nanotwinning Journal Article

NANO LETTERS, 16 (12), pp. 7573-7579, 2016, ISSN: 1530-6984.

Abstract | Links | BibTeX

Dr. Öğr. Üyesi Kasım Toprak

Eğitim

Lisans: Zonguldak Karaelmas Üniversitesi, Türkiye, Makina Mühendisliği, 2006
Yüksek Lisans: Rice Üniversitesi, ABD, Makina Mühendisliği, 2010
Doktora: Rice Üniversitesi, ABD, Makina Mühendisliği, 2014

Çalışma Alanları

  • Enerji Verimliliği
  • Termal Enerji Depolama Sistemleri
  • Isı Geri Kazanımı
  • Isıtma, Soğutma ve İklimlendirme Sistemleri
  • Yenilenebilir Enerji
  • Nanomalzemelerin Isı Transferi
  • Moleküler Dinamik
  • Termofiziksel Özellikler
  • Isı Transferi İyileştirmesi
  • +90 232 750 6761
  • +90 232 750 6701
  • Makina Mühendisliği Binası (117)

2023

Toprak, Kasim; Bayazitoglu, Yildiz

LONGITUDINAL THERMAL CONDUCTIVITY OF Cu-SWCNT CORE-SHELL NANOWIRE: MOLECULAR DYNAMICS SIMULATIONS Journal Article

Heat Transfer Research, 54 (4), pp. 77 – 89, 2023.

Abstract | Links | BibTeX

2020

Toprak, Kasim; Ouedraogo, Kiswendsida Elias

Performance Analysis of Thermal Storage Assisted Cooling Tower with Night Cooling Journal Article

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 23 (4), pp. 1027-1035, 2020, ISSN: 1302-0900.

Abstract | BibTeX

Toprak, K; Ouedraogo, K E

Effect of storage tanks on solar-powered absorption chiller cooling system performance Journal Article

International Journal of Energy Research, 44 (6), pp. 4366-4375, 2020.

Abstract | Links | BibTeX

2014

Toprak, Kasim; Bayazitoglu, Yildiz

Interfacial thermal resistance of Cu-SWCNT nanowire in water Journal Article

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 79 , pp. 584-588, 2014, ISSN: 0017-9310.

Abstract | Links | BibTeX

2013

Toprak, K; Bayazitoglu, Y

Numerical modeling of a CNT-Cu coaxial nanowire in a vacuum to determine the thermal conductivity Journal Article

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 61 , pp. 172-175, 2013, ISSN: 0017-9310.

Abstract | Links | BibTeX

Dr. Öğr. Üyesi Benay Uzer Yılmaz

Bölüm Başkan Yardımcısı

Eğitim

Lisans: Koç Üniversitesi, Türkiye, Makina Mühendisliği, 2013
Doktora: Koç Üniversitesi, Türkiye, Makina Mühendisliği, 2017

Çalışma Alanları

  • Metalik İmplantların Mekanik ve Mikro Yapı Tasarımı 
  • Metalik Malzemelerin Eklemeli İmalatı
  • Fonksiyonel Biomalzemeler için Biyo-benzetimli Yapıların Tasarımı
  • Hücre-implant Arayüz Tasarımı
  • +90 232 750 6709
  • +90 232 750 6701
  • Makina Mühendisliği Binası (110)

2021

Uzer-Yilmaz, B

In vitro contact guidance of glioblastoma cells on metallic biomaterials Journal Article

Journal of Materials Science: Materials in Medicine, 32 (4), 2021.

Abstract | Links | BibTeX

2020

Uzer, B

Modulating the Surface Properties of Metallic Implants and the Response of Breast Cancer Cells by Surface Relief Induced via Bulk Plastic Deformation Journal Article

Frontiers in Materials, 7 , 2020.

Abstract | Links | BibTeX

2018

Uzer, B; Picak, S; Liu, J; Jozaghi, T; Canadinc, D; Karaman, I; Chumlyakov, Y I; Kireeva, I

On the mechanical response and microstructure evolution of NiCoCr single crystalline medium entropy alloys Journal Article

Materials Research Letters, 6 (8), pp. 442-449, 2018.

Abstract | Links | BibTeX

Canadinc, D; Uzer, B; Elmadagli, M; Guner, F

Nanotwin Formation in High-Manganese Austenitic Steels Under Explosive Shock Loading Journal Article

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 49 (4), pp. 1026-1030, 2018.

Abstract | Links | BibTeX

Uzer, B; Canadinc, D

The effect of plastic deformation on the cell viability and adhesion behavior in metallic implant materials Journal Article

Ceramic Transactions, 261 , pp. 187-196, 2018.

Abstract | Links | BibTeX

2017

Uzer, B; Birer, O; Canadinc, D

Investigation of the Dissolution–Reformation Cycle of the Passive Oxide Layer on NiTi Orthodontic Archwires Journal Article

Shape Memory and Superelasticity, 3 (3), pp. 264-273, 2017.

Abstract | Links | BibTeX

2016

Uzer, B; Toker, S M; Cingoz, A; Bagci-Onder, T; Gerstein, G; Maier, H J; Canadinc, D

An exploration of plastic deformation dependence of cell viability and adhesion in metallic implant materials Journal Article

Journal of the Mechanical Behavior of Biomedical Materials, 60 , pp. 177-186, 2016.

Abstract | Links | BibTeX

Emekli Öğretim Üyelerimiz

 

Prof. Dr. Gürbüz Atagündüz

Kurucu Bölüm Başkanı

Yüksek Lisans Braunschweig Yüksek Teknik Okulu, Almanya, 1961
Doktora Stuttgart Yüksek Teknik Okulu, Almanya, 1965
 

Prof. Dr. Rasim Alizade

Lisans Kharkov Trenyolu Taşımacılığı Mühendisliği Enstitüsü, Rusya, Makina Mühendisliği, 1960
Yüksek Lisans Kharkov Trenyolu Taşımacılığı Mühendisliği Enstitüsü, Rusya, Makina Mühendisliği, 1965
Doktora Institue Mashino vedenie AN USSR, Moskova, Makina Mühendisliği, 1968
 

Prof. Dr. Zafer İlken

Lisans Ortadoğu Teknik Üniversitesi, Türkiye, Makina Mühendisliği, 1982
Yüksek Lisans Dokuz Eylül Üniversitesi, Türkiye, Makina Mühendisliği, 1987
Doktora Dokuz Eylül Üniversitesi, Türkiye, Makina Mühendisliği, 1990
 

Prof. Dr. M. Barış Özerdem

Lisans Dokuz Eylül Üniversitesi, Türkiye, Makina Mühendisliği, 1982
Yüksek Lisans Dokuz Eylül Üniversitesi, Türkiye, Makina Mühendisliği, 1985
Doktora Dokuz Eylül Üniversitesi, Türkiye, Makina Mühendisliği, 1991
 

Prof. Dr. Macit Toksoy

Lisans İstanbul Teknik Üniversitesi, Türkiye, Makina Mühendsiliği, 1972
Yüksek Lisans İstanbul Teknik Üniversitesi, Türkiye, Makina Mühendisliği, 1972
Doktora Ege Üniversitesi, Türkiye, Makina Mühendsiliği, 1976
 

Prof. Dr. Bülent Yardımoğlu

Lisans Dokuz Eylül Üniversitesi, Türkiye, Makina Mühendisliği, 1985
Yüksek Lisans Dokuz Eylül Üniversitesi, Türkiye, Makina Mühendisliği, 1987
Doktora Dokuz Eylül Üniversitesi, Türkiye, Makina Mühendisliği, 1992