MECHANICAL ENGINEERING

Türkçe siteyi ziyaret edin

Assoc. Prof. H. Seçil Artem

  • Contact: secilartem@iyte.edu.tr
  • Telephone(Office): +90 232 750 6771
  • Fax Number: +90 232 750 6701
  • Office: Mechanical Engineering Building 114

EDUCATION

  • Ph.D. (1990-1999): MIDDLE EAST TECHNICAL UNIVERSITY-GRADUATE SCHOOL OF NATURAL AND APPLIED SCIENCES / ENGINEERING SCIENCES 
    Thesis Title: Problem of cracked hollow cylinder with two rigid inclusions (1999) Supervisor: (MEHMET RUŞEN GEÇİT)
  • M.Sc. (1987-1990): MIDDLE EAST TECHNICAL UNIVERSITY – GRADUATE SCHOOL OF NATURAL & APPLIED SCIENCES / ENGINEERING SCIENCES
    Thesis Title: Development of a new solver for nonlinear parabolic phenomena (1990) Supervisor: (AHMET NEDİM ERASLAN)
  • B.S. (1981-1987): MIDDLE EAST TECHNICAL UNIVERSITY – FACULTY OF ENGINEERING / DEPARTMENT OF ENGINEERING SCIENCES / DEPARTMENT OF ENGINEERING SCIENCES

Academic Tasks

  • Associate Professor (2015): İZMİR INSTITUTE OF TECHNOLOGY / FACULTY OF ENGINEERING / DEPARTMENT OF MECHANICAL ENGINEERING / MECHANICAL ENGINEERING PR.
  • Assistant Professor (2001-2015): İZMİR INSTITUTE OF TECHNOLOGY / FACULTY OF ENGINEERING / DEPARTMENT OF MECHANICAL ENGINEERING
  • Instructor (1998-2001): İZMİR INSTITUTE OF TECHNOLOGY / FACULTY OF ENGINEERING / DEPARTMENT OF MECHANICAL ENGINEERING
  • Research Assistant (1987-1996): MIDDLE EAST TECHNICAL UNIVERSITY / FACULTY OF ENGINEERING / DEPARTMENT OF ENGINEERING SCIENCES

Research Group

  • MSc Students
    -Cagla Dilsiz
    -Özcan Dinç
    -Gökay Adabaşı
    -Alihan Imamoglu
  • PhD Students
    -Harun Sayı
    -Ozan Ayakdaş

Supervised Theses

Master’s Degree

  • GÜRLER YİĞİT, (2018). Design and mechanical behavior of brazed plate heat exchangers, Izmir Institute of Technology -> The Graduate School of Engineering & Sciences-> Department of Mechanical Engineering
  • HASANOĞLU EMRE AZİM, (2018). Stacking sequence optimization and modeling of laminated composite plates for free vibration, Izmir Institute of Technology -> The Graduate School of Engineering & Sciences-> Department of Mechanical Engineering
  • SAYI ABDÜLMECİT HARUN, (2018). Optimum design of composite hydrogen pressure vessels by stochastic search methods, Izmir Institute of Technology -> The Graduate School of Engineering & Sciences-> Department of Mechanical Engineering
  • DİNÇ ÖZCAN, (2018). Optimization of Cutting Parameters For Aluminum Alloys Using Wear Characteristics, Izmir Institute of Technology -> The Graduate School of Engineering & Sciences-> Department of Mechanical Engineering
  • DİLSİZ KADRİYE ÇAĞLA, (2017). Exact solution and static analysis of a curved shaft of varying cross-section, Izmir Institute of Technology -> The Graduate School of Engineering & Sciences-> Department of Mechanical Engineering
  • HASANOĞLU EMRE AZİM, (2016). Stacking sequence optimization and modeling of laminated composite plates for free vibration, Izmir Institute of Technology -> The Graduate School of Engineering & Sciences-> Department of Mechanical Engineering
  • GÜLMEZ ERKUT, (2014). Minimum weight design of carbon/epoxy laminated composites for maximum buckling load using simulated annealing algorithm, Izmir Institute of Technology -> The Graduate School of Engineering & Sciences-> Department of Mechanical Engineering
  • BOYACI HAKAN, (2014). Stacking sequence optimization of the anti-buckled graphite/epoxy laminated composites for minimum weight using generalized pattern search algorithm, Izmir Institute of Technology -> The Graduate School of Engineering & Sciences-> Department of Mechanical Engineering
  • SÖYLEYİCİ MEHMET UMUT, (2011). Stacking sequences optimization of the anti-buckled laminated composites considering various failure criteria, Izmir Institute of Technology -> The Graduate School of Engineering & Sciences-> Department of Mechanical Engineering
  • DEVECİ HAMZA ARDA, (2011). Optimum design of anti-buckling behaviour of the laminated composites considering puck failure criterion by genetic algorithm, Izmir Institute of Technology -> The Graduate School of Engineering & Sciences-> Department of Mechanical Engineering
  • AVCI FATİH, (2009). Analysis of the cracked infinite hollow cylinder with loading on crack surfaces, Izmir Institute of Technology -> The Graduate School of Engineering & Sciences-> Department of Mechanical Engineering
  • AYDIN LEVENT, (2005). Investigation of stress intensity factor in an elastic cylinder under axial tension with a crack of ring-shape, Izmir Institute of Technology -> The Graduate School of Engineering & Sciences
  • ÖTERKUŞ ERKAN, (2002). Evaluation of stress intensity factor for an infinite hollow cylinder containing a crack and two rigid inclusions by finite element analysis, Izmir Institute of Technology -> The Graduate School of Engineering & Sciences

 Doctoral Degree

  • DEVECİ HAMZA ARDA, (2017). Optimum design of carbon/epoxy composite laminates for maximum fatigue life using multiaxial prediction models, Izmir Institute of Technology -> The Graduate School of Engineering & Sciences-> Department of Mechanical Engineering
  • DEVECİ CAN DENİZ, (2016). Acoustical analysis of inside of a refrigerator, Izmir Institute of Technology -> The Graduate School of Engineering & Sciences-> Department of Mechanical Engineering
  • DEVECİ HAMZA ARDA, (2014). Design Optimization of Laminated Composites subjected to Hygro-Thermo-Mechanical Loading for Maximum Fatigue Resistance, Izmir Institute of Technology -> The Graduate School of Engineering & Sciences
  • YILDIRIM ZEYNEP ELVAN, (2013). A study on heat, mass and fluid flow in an adsorbent bed consisting of limited number of adsorbent grain layers, Izmir Institute of Technology -> The Graduate School of Engineering & Sciences
  • AYDIN LEVENT, (2011). Design of dimensionally-stable laminated composites subjected to hygro-thermo-mechanical loading by stochastic optimization methods, Izmir Institute of Technology -> The Graduate School of Engineering & Sciences-> Department of Mechanical Engineering

Administrative Tasks

  • Vice Head of Department (2005-2015): İZMİR INSTITUTE OF TECHNOLOGY / FACULTY OF ENGINEERING / DEPARTMENT OF MECHANICAL ENGINEERING

Duties in Projects

  1. Development of the thermo-mechanical properties of fiber-reinforced layered polymer matrix composites using genetic optimization, BAP, Executive, 2009-2009 (NATIONAL)
  2. Design, Optimization and Prototype Manufacturing of High Pressure Resistant Lightweight Composite Tank Materials and Systems for Hydrogen Storage and Distribution , Researcher: AYDIN ​​LEVENT, Researcher: TANOĞLU METİN, Executive: ARTEM HATİCE SEÇİL, Researcher: AKTAŞ ENGİN, 15/04/2016 (In Progress) (NATIONAL)
  3. Optimization and design of high-pressure lightweight composite tank materials and systems for the storage and distribution of hydrogen, production of prototypes, TÜBİTAK PROJECT, Scholarship: KARTAV OSMAN, Executive: ARTEM HATİCE SEÇİL, Researcher: TANOĞLU METİN, Researcher: AYDIN ​​LEVENT, Researcher: KANDEMİR SİNAN, Scholar: SAYI Harun, Scholar: KANGAL SERKAN, Researcher: AKTAŞ ENGİN,, 15/04/2016 (In Progress) (NATIONAL)
  4. IZTECH Composite Material Research Center Project, Researcher, (2009-2011)

Courses

  • Undergraduate
  • Applied Mathematics for Engineers (ME 242)
  • Statics (ME 221)
  • Strength of Materials (ME 224)
  • Introduction to Solid Mechanics (ME 458)
  • Graduate
  • Analytical Methods in Engineering (ME 590)
  • Theory of Elasticity (ME 563)
  • Fracture Mechanics (ME 510)

Scientific Publications

  • Articles published in international refereed journals
  1. DEVECİ HAMZA ARDA, ARTEM HATİCE SEÇİL (2018).  On the estimation and optimization capabilities of the fatigue life prediction models in composite laminates.  Journal of Reinforced Plastics and Composites, 37(21), 1304-1321., Doi: 10.1177/0731684418791231 (Pub. No: 4419017)
  2. DEVECİ HAMZA ARDA, ARTEM HATİCE SEÇİL (2017).  Optimum Design of Fatigue-resistant composite laminates using hybrid algorithm.  Computers and Structures, 168, 178-188., Doi: 10.1016/j.compstruct.2017.01.064 (Pub. No: 3870199)
  3. AYDIN LEVENT,Aydın Olgun, ARTEM HATİCE SEÇİL,MERT ALİ (2016).  Design of dimensionally stable composites using efficient global optimization method.  Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Doi: 10.1177/1464420716664921 (Pub. No: 2960016)
  4. DEVECİ HAMZA ARDA,AYDIN LEVENT, ARTEM HATİCE SEÇİL (2016).  Buckling optimization of composite laminates using a hybrid algorithm under Puck failure criterion constraint.  Journal of Reinforced Plastics and Composites, 35(16), 1233-1247., Doi: 10.1177/0731684416646860 (Pub. No: 2959922)
  5. Aydin L, Artem HS (2011).  Comparison of Stochastic Search Optimization Algorithms for the Laminated Composites under Mechanical and  Hygrothermal Loadings.  JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 30(14), 1197-1212., Doi: 10.1177/0731684411415138 (Pub. No: 874368)
  6. Artem H. S., Aydın L. (2010).  Exact solution and dynamic buckling analysis of a beam column system having the elliptic type loading.  Applied Mathematics and Mechanics, 31(10), 1317-1324., Doi: 10.1007/s10483-010-1364-8 (Pub. No: 874207)
  7. AYDIN LEVENT,ALTUNDAG ARTEM HATİCE SEÇİL (2008).  Axisymmetric crack problem of thick walled cylinder with loadings on crack surfaces.  Engineering Fracture Mechanics, 75(6), 1294-1309., Doi: 10.1016/j.engfracmech.2007.07.016 (Pub.  No: 874135)
  8. Altundağ Artem HS, Geçit MR (2002).  An Elastic Hollow Cylinder Under Axial Tension Containing a Crack and Two Rigid Inclusions of Ring Shape.  COMPUTERS & STRUCTURES, 80, 2277-2287. (Pub.  No: 873975)
  • Papers presented in international scientific meetings and published in proceedings
  1. HASANOĞLU EMRE AZİM,ARTEM HATİCE SEÇİL (2018).  STACKING SEQUENCE OPTIMIZATION AND MODELING OF LAMINATED COMPOSITE PLATES FOR FREE VIBRATION.  4th International Aegean Composite Materials Symposium, 648-668. (Full Text Presentation / Oral Presentation) (Publication Number: 4660449)
  2. DEVECİ HAMZA ARDA,ARTEM HATİCE SEÇİL,GÜNEŞ MEHMET DENİZ,TANOĞLU METİN (2018).  OPTIMUM DESIGN OF CARBON/EPOXY COMPOSITE LAMINATES FOR MAXIMUM FATIGUE LIFE.  Kompege 2018 IV. International Ege Composite materials Symposium, 47 (Abstract Paper) (Publication No: 4703086)
  3. KARTAV OSMAN,KANGAL SERKAN,AKTAŞ ENGİN,ARTEM HATİCE SEÇİL,TANOĞLU METİN (2018).  INVESTIGATION OF HYBRID PLY EFFECT ON BURST PRESSUREPERFORMANCE OF COMPOSITE OVERWRAPPED PRESSUREVESSELS.  Kompege 2018 IV. International Ege Composite Materials Symposium, 134 (Abstract) (No: 4707913)
  4. KANGAL SERKAN,KARTAV OSMAN,TANOĞLU METİN,AKTAŞ ENGİN,ARTEM HATİCE SEÇİL (2018).  DEVELOPMENT OF COMPOSITE HIGH PRESSURE VESSELS FOR HYDROGENSTORAGE.  9th International Automotive Technologies Congress, OTEKON 2018, 539-543. (Full Text Presentation / Oral Presentation) (Publication Number: 4660858)
  5. DEVECİ HAMZA ARDA,ARTEM HATİCE SEÇİL (2017).  Optimum Design of Fatigue-Resistant Carbon/Epoxy Composite Laminates.  The 7th Fatigue Design conference (Poster)(Publication Number: 3975062)
  6. SAYI Harun,ARTEM HATİCE SEÇİL,AYDIN LEVENT,AYAKDAŞ Ozan (2017).  Stacking Sequences Design of Composite Hydrogen Storage Tanks using Optimization Algorithms.  V. Uluslararası  Polimerik Kompozitler Sempozyumu ve  Çalıştayıları, 201-209. (Full Text Presentation / Oral Presentation) (Publication Number: 4052335)
  7. BEYLERGİL BERTAN,AKTAŞ ENGİN,TANOĞLU METİN,ARTEM HATİCE SEÇİL (2017).  Optimal Design of Compressed Hydrogen Storage Vessels using Multi-objective Genetic Algorithm.  V. Uluslararası Polimerik Kompozitler Sempozyumu ve Çalıştayları, 77-88. (Full Text Presentation / Oral Presentation) (Publication Number 4071886)
  8. AYAKDAŞ Ozan,AYDIN LEVENT,ARTEM HATİCE SEÇİL,SAYI Harun (2017).  Failure Analysis and Optimization of the Cylindrical Part  of Type-III Hydrogen Storage Tanks.  V. Uluslararası Polimerik Kompozitler Sempozyumu ve Çalıştayları, 341-351. (Full Text Presentation / Poster) (Publication Number::4054012)
  9. DEVECİ HAMZA ARDA,ARTEM HATİCE SEÇİL (2017).  On the estimation and optimization capabilities of the fatigue life prediction models in composite laminates.  3rd International Conference on Mechanics of Composites, 92-93., Doi: 10.15651/978-88-9385-029-2 (Full Text Presentation / Oral Presentation) (Publication Number: 3974851)
  10. ARTEM HATİCE SEÇİL,DEVECİ HAMZA ARDA (2014).  Optimum Design of Laminated Composites for Maximum Fatigue Life.  ICCST/10 10th International Conference on Composite Science and Technology (Full Text Presentation) (Publication Number::2199877)
  11. Deveci HA, Aydın L, Artem HS (2013).  Optimum Design for Anti buckled Laminated Composites Considering Puck Failure Criterion by Genetic Algorithm.  4th InternationalConference on Mathematical and Computational Applications, 372-381. (Full Text Presentation) (Publication Number: 1124879)
  12. Deveci HA, Söyleyici MU, Aydın L, Artem HS (2011).  Weight Optimization of the Laminated Composites as an Aircraft Structure Material using Different Failure Criteria.  The 2nd International Symposium on Computing in Science and Engineering(ISCSE2011), 801-808. (Full Text Presentation) (Publication Number: 1124828)
  13. Aydın L, Artem HS (2010).  Single and Multi Objective Genetic AlgorithmOptimizations of the Laminated Composites used in Satellite Structures.  AzCIFToMM 2010- International Symposium of Mechanism and Machine Science, 219-226. (TFull Text Presentation) (Publication Number: 1124752)
  14. Aydın L, Artem HS (2009).  Multiobjective Optimization of Fiber Reinforced Composite Laminates for Stiffness and Thermal Expansion Coefficient Using Genetic Algorithm.  AIAC-5th Ankara International Aerospace Conference (TFull Text Presentation / Oral Presentation) (Publication Number:1124705)
  15. Aydin Levent, Secil Artem H. (2009).  Multiobjective Genetic Algorithm optimization of the composite laminates as a satellite structure material for coefficient of thermal expansion and elastic modulus.  2009 4th International Conference on Recent Advances in Space Technologies, Doi: 10.1109/RAST.2009.5158179 (Full Text Presentation) (Publication Number:1124420)
  16. Aydın. L, Altundağ Artem. HS (2005).  Investigation of Stress Intensity Factors for an Elastic Thick walled Cylinder with a Crack of Ring Shape.  7th International Fracture Conference, 1(1), 273-291. (Full Text Presentation) (Publication Number:1124518)
  17. Altundağ Artem.HS, Geçit. MR (2000).  Fracture of an Axisymmetric Hollow Cylindrical Bar Containing Rigid Inclusions.  ACE2000 4th International Congress on Advances in Civil Engineering, 4, 1502-1511. (Full Text Presentation) (Publication Number:1124634)
  18. Altundağ Artem. HS, Gecit. MR (2000).  Problem of Cracked Infinite Hollow Cylinder with Two Rigid Inclusions.  5th International Conference on Computational StructuresTechnology, 233-241., Doi: 10.4203/ccp.67.5.3 (Full Text Presentation) (Publication Number: 1124297)
  • Written national / international books or chapters in books
  1. Fiber Technology for Fiber-Reinforced Composites, Department Name: (Design and Optimization of Fiber Composites) (2017)., Aydın Levent, Artem Hatice Seçil, Woodhead Publishing, Editor: M. Mohammad Seydibeyoglu, Amar Mohanty, Manjusri Misra, Edition number: 1, Number of Pages 336, ISBN: 9780081018712, English (Scientific Book), (Issue Number: 3536937)
  2. Fiber Technology for Fiber-Reinforced Composites, Department of Mechanics of Fiber Composites (2017)., Aydın Levent, Artem Hatice Seçil, Oterkus Erkan, Gundogdu Omer, Akbulut Hamit, Woodhead Publishing, Editor: M. Ozgur Seydibeyoglu, Amar Mohanty , Manjusri Misra, Printing number: 1, Number of Pages 336, ISBN: 9780081018712, English (Scientific Book), (Publication No: 3536936)
  3. Fiber Technology for Fiber-Reinforced Composites, Department of Mechanics of Fiber Composites (2017)., Aydın Levent, Artem Hatice Seçil, Oterkus Erkan, Gundogdu Omer, Akbulut Hamit, Elsevier, Editor: Seydibeyoglu, M. Ozgur, Mohanty, Amar K., Misra, Manjusri, Publication Number: 1, English (Scientific Book), (Publication No: 4096281)
  • Articles published in national refereed journals
  1. AYDIN LEVENT, ARTEM HATİCE SEÇİL, Savran Melih (2017). The Optimization of Dimensional Stable Composite Materials Using Genetic Algorithm. Afyon Kocatepe University Journal of Science and Engineering Sciences (Control No: 3909615)
  • Papers presented in national scientific meetings and published in proceedings
  1. Altindag Artem HS, The Rigid Tube Incidence of Axial Shrinkage Including Rigid Clusters and Fissures in the Vertical Direction to the MR Axis. XI. National Mechanical Congress (1999) (Full Text) (Publication No: 1124996)
  2. DEVECİ HAMZA ARDA, ARTEM HATİCE SEÇİL (2015). Optimum Design for Maximum Fatigue Life of Composers Exposed to Cyclic Load. 17th International Machine Theory Symposium with International Participation (UMTS2015), 31-38. (Full Text Announcement) (Publication Number: 2200543)
  3. Söyleyici MU, Deveci HA, Aydın L, Artem HS (2013). Stacking Sequences. KOMPEG A-II. National Aegean Composite Materials Symposium, 39-55. (Full Text Announcement) (Publication No: 1124943)
  4. Altundağ Artem HS, Eraslan AN (1989). Computer Solutions of Laminar Flame Equations. Second National Combustion Symposium (1989) (Full Text) (Publication No: 1125095)
  • For detailed information about the Optimization Modeling and Applied Math Research Group: www.oma-rg.com